A specially designed time saving tool for the removal of the CV joint on most vehicles. The tool is more rigid / compact that other similar tools, allowing for it to be used in tight spaces, and avoiding the need to hammer the CV joint to remove it.
A single sided design also allows for easier installlation of the clamp.
- Washer included to allow the tool to be used with the original CV joint nut.
- Alternatively, four types of optional nuts are included, to allow for more efficient operation than using the original CV joint nut.
- Suits both conventional / new type CV joint removal
| SKU | ET2321C |
| Barcode # | 9321280425545 |
| Brand | Automotive |
| Product weight | 3.6000kg |
| Shipping weight | 3.600000kg |
| Vehicle Make | Universal |
12 Months
More from this category
Air Powered CV Boot Install Tool
This specialised tool installs CV boots without the need to first remove drive shafts from the vehicle, or the CV joint from the drive shaft.
Use with standard shop air. Not suitable for plastic CV boots.
- Suits CV joint dia: 25-110mm
- 1/4" BSP air inlet size
- 72 - 113 PSI working pressure
- Replacement rubber boot available (ET4151-RB)
Band Type Boot Clamp Tool
Designed for fastening band clamps on CV boots. Crank and handle allows for tension to be kept while tightening the clamps during installation.
Made from quality steel construction with powder coated finish.
- 10mm (3/8") maximum band width
- 230mm overall length
BMW / Mercedes Freewheel Mechanism Tool
This freewheeling adaptor allows vehicles to be moved even with the gearbox / transmission locked. Particularly useful for when the transmission servo module (ISM) fails. For use in workshop only / maximum speed 5 kph.
Simply raise the vehicle / remove either rear wheel / install the adapter (torque to 80Nm). Remount wheel to adapter. Vehicle can then easily be pushed around the workshop.
- Suits BMW (F01 | F02 | F07 | F10 | F11 | F12 | F13 | F25 | F30 | F31 | F32 | F33 | F34) / Mercedes (W164 | W204 | W212 | W221 | W251)
- Black bolts - Mercedes | Silver bolts - BMW
- OEM Equiv:164 589 03 63 00
- Sold individually
BMW CV Output Shaft Kit
A specialised kit for removing / installing seized output CV shafts in wheel hubs. This kit suits many BMW vehicles, but not the E53 X5. For this vehicle, refer ET1253D.
- Applications: E30 | E31 | E32 | E36 | E39 | E46 | E52 | E53 | E60 | E63 | E64 | E65 | E66 | E67 | E83 | E85 | RR1
BMW CV Output Shaft Kit
A specialised kit for removing / installing seized output CV shafts in wheel hubs.
This kit includes adaptors for the X1 | X3 | X5 | X6.
- Applications: E30 | E31 | E32 | E36 | E39 | E46 | E52 | E53 | E60 | E63 | E64 | E65 | E66 | E67 | E70 | E71 | E83 | E85 | RR1
BMW Tail Shaft Differential Flange Nut Tool
A specialised tool holds the driveshaft connecting nut. This is designed for use with the ET1653A.
- Engines: N20 | N52 | N54 | N55 | N57 | N63 | S63
- Series: F10 | F25