Ajax

Replacement head for the ET1206 1/2" Sq Drv ratcheting breaker bar.

• 1/4" hex drive
• 60mm overall length
• Magnetic

Quality kit for rivets up to 3/16" mild steel.

• 3/16 | 3/32 | 1/8 | 5/32"
• Aluminium / mild steel only
• Max air pressure: 90 PSI

1/4" collet to suit most die grinders. Part of the Ajax range of air tool accessories.

Ajax sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.

Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Ajax sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.

• 1/4" BSP female inlet
• Clip On connector
• Sealing type chuck

Engrave most materials with ease. A professional quality unit with steel housing.

• 13,000 blows / minute
• Hose length: 1.48m
• Air inlet: 1/4" NPT

• Rivet Sizes: 3/16" 3/32", 1/8", 5/32"
• Aluminium & mild steel rivets only

• Nose Pieces: 1/8" | 5/32" | 3/16" | 1/4"
• Traction Power: 1,700kg
• Stroke length: 14mm

• Nose Pieces: 1/8" | 5/32" | 3/16" | 1/4"
• Traction Power: 1,700kg
• Stroke length: 14mm

Industrial grade air saw designed for professional panel shop use. Easily cuts mild steel up to 1.5mm thick (and aluminium panels up to 3.2mm thick).

Supplied with 2 bonus blades.

• Comfortable rubber grip
• Cutting capacity: 1.5mm mild steel | 3.2mm aluminium

• Tube length: 310mm
• Avg air cons: 6.0 CFM

A trade quality air caulking gun with aluminium body. Suits most standard 310CC cartridges.

• Cartridge size: 310 CC
• Bore: 50 216mm
• Avg air cons: 6.0 CFM

Quality steel chisel to suit flux chippers.

• Bent tip
• 35mm tip diameter

Straight type hammer with chisel head for flux removal. Replacement chisels available.

• 5mm hex power bit
• 1/4" hex drive
• 50mm overall length
• A2 steel | magnetised
• 10 pack

High quality power bits for screwdriver / impact wrenches. A2 Steel | Magnetised. 6 piece kit.

• Hex: 2 | 2.5 | 3 | 4 | 5 | 6mm
• 1/4" hex drive
• 150mm long
• A2 Steel | Magnetised

• For M10 Hex screws
• A2 steel
• Magnetic

This kit contains three magnetic metric sized nutsetters which are ideal for use with cordless drivers to fasten / remove common sizes of hose clamps.

• 7mm | 8mm | 10mm
• 55mm overall length
• 1/4" hex drive
• Magnetised

• Capacity 0.6 - 1.5 kg
• Work Air Pressure: 7 kg/cm
• Tube Length: 90 cm ~ 200 cm
• Net Weight: 0.86 kg
• Overall Length: 700mm
• Air Inlet: 1/4" NPT