Modular bracketing system provides the professional mounting of both a combination Filter/Regulator and a oiling lubricator unit as one complete FRL package.

Supplied with gauge and bracket.

Sonsbeek modular type filter regulators, suitable for panel mounting. A high quality unit with bronze filtering element, separator and shield for efficient moisture control, and semi automatic drain.

These units are a diaphragm operated, relieving type. Pressure compensated. Steel bowl guard. Good flow and regulating characteristics. Supplied complete with bracket and gauge.

Fully Automatic draining filter unit, suitable for modular mounting:

• Bayonet type steel bowl guard
• Float type - No Electrical connections required
• Provision for drain tube connection; to take the connection away from the unit

Working Temperature: From -20^oC to 150^oC

Body: Brass

Sub Base: Brass

Silencer: Sintered bronze

These gauges are ideally suited for Compressors, Rotary Pumps and Regulators.

When ordering please order a reading higher than the expected operating conditions, as it may stretch if used continuously on the maximum readout.

If operating around 600-700Pa/85-100PSI, a 1000kPa/1445PSI gauge should be used as a general guide gauges should operate at around 60-70% of their readout. 

Liquid Filled Gauges provide users with a number of advantages in certain measurement applications. They are ideally suited for use on equipment where excessive vibration and pulsation are encountered, such as pumps, compressors, machine tools etc. The liquid fill minimises the effect of these sever environments, protects the gauge internals and provides continuous lubrication of the mechanism; all adding up to a longer service life. Liquid filling also provides greater protection of gauge internals from corrosive atmospheres.

Liquid Filled Gauges are NOT SUITABLE where oxidising agents are used as:

Oxygen, Chlorine, Nitric Acid and Hydrogen Peroxide are being used.  

These gauges are ideally suited for Compressors, Rotary Pumps and Regulators.

When ordering please order a reading higher than the expected operating conditions, as it may stretch if used continuously on the maximum readout.

If operating around 600-700Pa/85-100PSI, a 1000kPa/1445PSI gauge should be used as a general guide gauges should operate at around 60-70% of their readout. 

Liquid Filled Gauges provide users with a number of advantages in certain measurement applications. They are ideally suited for use on equipment where excessive vibration and pulsation are encountered, such as pumps, compressors, machine tools etc. The liquid fill minimises the effect of these sever environments, protects the gauge internals and provides continuous lubrication of the mechanism; all adding up to a longer service life. Liquid filling also provides greater protection of gauge internals from corrosive atmospheres.

Liquid Filled Gauges are NOT SUITABLE where oxidising agents are used as:

Oxygen, Chlorine, Nitric Acid and Hydrogen Peroxide are being used.  

GBS bolt clamps in accordance with DIN 3017 are especially suitable for sealing suction and pressure hoses which have plastic or steel reinforcements and high shore hardness.

Benefits:

• Wide clamping range
• High clamping forces
• Several bandwidths
• Various materials
• Single and multipart design

Small and Compact

Body is Brass Nickel Plated

Arrow indicates direction of flow

99%+ removal efficiency standard: Paper = 2 micron, Polyester = 5 micron

Ability to mount vertically, horizontally

Durable carbon steel construction with powder coated finish or galvanized steel

Filter change out differential: 10” – 15” in. H2O above initial Delta P

Fully drawn weather hood- no wealds to rust or vibrate apart

Interchangeable elements: Polyester, Paper, HEPA

Patented high grade filter element

Temp (continuous): min -15^o F (-26 ^o C) max 220 ^o F (104 ^oC)

Tubular silencing design- tube is positioned to maximize attenuation and air flow while minimizing pressure drop

Typical noise attenuation up to 25 dB’s

Replacement air intake filter assembly designed to simply screw into the air compressor.

TECHNICAL

These couplings have 2 tab buttons for a more secure lock.

The new 2008 release GENUINE SONSBEEK 320 Series Couplings have been designed for the Industrial market.

 Quality and performance.  

 Precision manufactured components.

Thread sealant applied to all male threads.

Anti corrosive silver Nickel plated.

INTERCHANGEABILITY

JAMEC 310/320

WORKING TEMPERATURE

-10°C up to +80°C—Buna N Seal

OPERATING PRESSURE

Safe working pressure to 250 PSI / 17 BAR

APPLICATIONS

Compressed air and pneumatic applications, but where only LOW flow rates are required.

SPECIAL PRODUCT:

Being one of our most popular ranges it has been imperative to introduce a 320 series SAFETY ADAPTOR to avoid hose whip and reduce noise at disconnection. 

 ASK US FOR MORE DETAILS

TECHNICAL

These couplings have 2 tab buttons for a more secure lock.

The new 2008 release GENUINE SONSBEEK 320 Series Couplings have been designed for the Industrial market.

 Quality and performance.  

 Precision manufactured components.

Thread sealant applied to all male threads.

Anti corrosive silver Nickel plated.

INTERCHANGEABILITY

JAMEC 310/320

ADVANTAGES

Twin tabs for more secure lock. Steel Valve Purple colour identification code

WORKING TEMPERATURE

-10°C up to +80°C—Buna N Seal

OPERATING PRESSURE

Safe working pressure to 250 PSI / 17 BAR

MAINTENANCE

Lubricate occasionally.

 Not recommended for Dry air applications Refer to the Air breathing section

Do not connect directly to “Impacting” Air Tools Always use a impact absorbing leader hose

APPLICATIONS

Compressed air and pneumatic applications, but where only LOW flow rates are required.

SPECIAL PRODUCT:

Being one of our most popular ranges it has been imperative to introduce a 320 series SAFETY ADAPTOR to avoid hose whip and reduce noise at disconnection. 

 ASK US FOR MORE DETAILS

BACK BODY        CASE HARDENED STEEL

VALVE BODY       CASE HARDENED STEEL

SLEEVE               CASE HARDENED STEEL

VALVE                           Steel

SPRING                      AISI 301

TABS                          AISI 420

SEALS                          Buna N

Suitable for industrial, pneumatic and hydraulic installations.

Ideal for hot/cold water, different oils, compressed air and gas.

Thread: ISO228- DIN259- BS2779

Minimum and maximum working temperature:

• Air: -15^oC, 220^oC
• Water: 0^oC, 150^oC Without steam
• Gas: -15^oC, 60^oC