• 10mm ID
• With Air Breathing fittings
• Australian made

Specialised air breathing hose for applications where the airline is connected to breathing masks, such as in panel beating.

Air breathing hose is also available fitted with air breathing fittings. Air breathing fittings are also available separately.

• Made in Australia
• From high quality polyurethane
• Available in lengths from 20m - 50m
• 10mm ID
• One touch Euro style coupler / adaptor

TECHNICAL

The New range of SONSBEEK SAFETY ADAPTORS designed for the Australian Market.

These safety adaptors are fitted with a venting check so that when a hose is disconnected from its supply point, the pressurised air contained in the hose bore itself does not eject in a violent manor.

This greatly reduces any hose whip and reduces the extreme noise at disconnection.

ADVANTAGES

Increased safety standards in the workplace.

INTERCHANGEABILITY

Available in all common coupling interchanges used through out Australia.

INTERCHANGEABILITY

Available in all common coupling interchanges used through out Australia.

IMPROVED ACCIDENT PREVENTION

This safety adaptor dramatically reduces the vicious hose whip experienced at the disconnection of a pressurised air hose.

IMPROVED INDUSTRIAL SAFETY

The extreme noise level experienced at disconnection is greatly reduced

WORKING TEMPERATURE

-20°C up to +60°C

WORKING PRESSURE

Safe working up to 250 PSI

APPLICATIONS

Compressed air hoses.

CAUTION

Always check your fittings are securely fastened before use.

NICKEL PLATED HARDENED STEEL CONSTRUCTION



NOTE

Purging times vary in relation to pressure and hose length


KEEP CLEAN

Sonsbeek Recoil Air Hose is braided to provide extra strength & flexibility in tough working conditions. Sonsbeek reinforced hose can tolerate higher working pressures and operates far better in hot ambient temperatures.

• Fitted with 1/4" BSP male swivel fittings.
• Made in Australia quality.

Cold start valves bleed air from the compressor head during the first few pump revolutions, thus reducing motor staring torque requirements. These valves are especially helpful on oil lubed pumps that may be subject to low temperatures and low starting voltages.

TECHNICAL

For modern day compressed air couplings, HIGH VOLUME is essential. 

 The new 2007 release GENUINE SONSBEEK 525 Series Couplings have been designed for the Industrial market.

 Quality and performance. 

 Precision manufactured components.

Thread sealant applied to all male threads.

Anti corrosive silver Nickel plated.

INTERCHANGEABILITY

CEJN 320, RECTUS 25 & 26

RYCO 500, JP EURO 59 series, RECTUS 26KE

 WORKING TEMPERATURE

-10°C up to +80°C—Buna N Seal

 OPERATING PRESSURE

Safe working pressure to 250 PSI / 17 BAR

APPLICATIONS

Compressed air and pneumatic applications, especially suitable where high flow rates are required.

SPECIAL PRODUCT:

Being one of our most popular ranges it has been imperative to introduce a 525 series SAFETY ADAPTOR to avoid hose whip and reduce noise at disconnection. 

TECHNICAL

For modern day compressed air couplings, HIGH VOLUME is essential. 

 GENUINE SONSBEEK 525 Series Couplings have been designed for the Industrial market.

 Quality and performance. 

 Precision manufactured components.

Thread sealant applied to all male threads.

Anti corrosive silver Nickel plated.

INTERCHANGEABILITY

CEJN 320, RECTUS 25 & 26

RYCO 500, JP EURO 59 series, RECTUS 26KE

ADVANTAGES

One Touch AUTOMATIC Operation means no need to pull back the sleeve to connect. This clever one touch design incorporates a valve design that offers high flow rates at more than 60CFM .

 WORKING TEMPERATURE

-10°C up to +80°C—Buna N Seal

 OPERATING PRESSURE

Safe working pressure to 250 PSI / 17 BAR

MAINTENANCE

Lubricate occasionally.

 Not recommended for Dry air applications Refer to the Air breathing section

 Do not connect directly to “Impacting” Air Tools Always use a impact absorbing leader hose

APPLICATIONS

Compressed air and pneumatic applications, especially suitable where high flow rates are required.

SPECIAL PRODUCT:

Being one of our most popular ranges it has been imperative to introduce a 525 series SAFETY ADAPTOR to avoid hose whip and reduce noise at disconnection. 

 ASK US FOR MORE DETAILS

BACK BODY     CASE HARDENED STEEL

VALVE BODY    CASE HARDENED STEEL

SLEEVE             CASE HARDENED STEEL

VALVE                           Brass

SPRING                       AISI 301

BALLS                         AISI 420

SEALS                          Buna N

Sonsbeek female hex sockets are precisely machined from long lasting brass. Available in a range of BSP thread sizes.

• Female hex sockets
• Made in Australia
• Brass