Quick, reliable diagnosis for all spark ignition systems, including Coil On Plug (COP) and general distributor type SPW.

Induction technology requiring no hook ups / ground wires / special adaptors.

Diagnose misfires, starting issues, damaged spark plugs / wires. Measure cylinder speed, ignition voltage, ignition time etc.

• Spark voltage (0-50,000V)
• Spark burn time (0-10ms)
• 200 to 19,999 RPM

Connects to any Power Probe. Limits output voltage to 5V. Essential for safely testing sensors and computer circuits on vehicles. Now you can supply a 5V reference signal to test computer modules, wiring and the components connected to them.

Very sharp probes suitable for piercing cable. Kit comes with two probes, one for 8-18 gauge wire, and the other for 20-28 gauge wire.

4mm banana jacks suit all standard multimeters / Power Probe units.

• Yellow - suits 8-18 gauge wire
• Green - suits 20-28 gauge wire

A 20 foot extension cable for Power Probe 3 circuit testers. Great for working on trucks, trailers and oversized vehicles.

• Original part # PN3049

20 foot extension cable for the Power Probe 4 / Maestro.

This clip set allows your Power Probe circuit tester to be powered from any 12V source. Suits all Power Probe 3 models only.

• Original part # PN3046

Replacement 3" probe tips, suitable for all Power Probe units. These are the original tips supplied with all Power Probe units. For a longer 6" tip, please refer to PPTK0043.

• With 4mm banana jack
• Original part # PN3015-BLK
• 2 pack

Connects to any Power Probe. Limits output voltage to 5V. Essential for safely testing sensors and computer circuits on vehicles. Now you can supply a 5V reference signal to test computer modules, wiring and the components connected to them.

This Power Probe kit contains two adaptors - a male / male and a female / female adaptor.  The 4mm connectors are suitable to use with all standard multimeters.

• male / male adaptor
• female / female adaptor