This advanced system tester is designed to test all 12V auto batteries (lead, AGM, EFB, GEL etc) including stop / start batteries. The unit tests battery condition PLUS charging (alternator) and starter (crank) systems.

The battery test analyses battery health status to calculate actual cold cranking capability of the battery. The tester will advise whether the battery needs replacing, and is also able to identify a faulty battery before actual failure.

The cranking test analyses the starting circuit (including the starter motor) by measuring increases in starting torque load. The charging test analyses the charging system, detecting under or overcharging.

• Testing range: 100 - 2,000CCA
• Powered from vehicle's 12V battery | no internal battery required

A professional quality automotive battery tester for testing both 12V lithium ion and lead acid batteries. This tester uses conductance technology; a passive testing methodology which does not discharge / drain the battery. This analyser also checks the alternator's charging and starter's cranking condition.

• Tests all 12V lithium ion / lead acid batteries for cars / motor cycles.
• Print function via PC printer
• Testing range: Lithium ion 20- 1000CCA | Lead acid 20 - 2000CCA

A professional quality tester designed for late model vehicles fitted with 13 pin Euro type sockets fitted to the back of the vehicle.

This tester is designed for testing the vehicle side socket, not the trailer itself.

• Tests socket functionality on modern 13 pin Euro sockets. Can also test legacy 7 pin sockets (separate adaptor).
• CANbus compatible to also test 12V continuous / ignition live feeds and the reversing lights. Useful when diagnosing faults.
• Built in self test function on the tool.
• Supplied with 4m cable to allow the unit to be used while sitting in the vehicle.
• Powered by vehicle 12V power supply.

The PPPWM is an adapter that is plugged into Power Probe products with 4mm banana plugs (such as THE MAESTRO / PP4 / PP3 / PP3EZ etc).

The adapter can be set for the output 0-100% pulse width drive waveform by pressing the key. It is mainly used for automotive applications such as automotive fan circuit detection, to find the part of the circuit failure, in order to replace and repair.

Duty cycle adjustable 5% - 100%.

For 12V / 24V use. 10A max continuous output.

This leadset contains an adaptor cap and banana jack.

• For Power Probe I & II only

This set comprises a universal 4mm wire and alligator clip connector.

• Original part # PNECT057

Replacement battery clip for the Power Probe 4.

• Original part # PP401

Replacement self resetting circuit breaker for the Power Probe 4.

• Original part # PC8A

Replacement fuse holder for the Power Probe 4.