Duty cycle adjustable 5% - 100%.
For 12V / 24V use. 10A max continuous output.
SKU | PPPWM |
Barcode # | 8435394788081 |
Brand | Power Probe |
Product weight | 0.1000kg |
Shipping weight | 0.130000kg |
12 Months
You may also like
Power Probe 5V Tip Adaptor
Connects to any Power Probe. Limits output voltage to 5V. Essential for safely testing sensors and computer circuits on vehicles. Now you can supply a 5V reference signal to test computer modules, wiring and the components connected to them.
Power Probe Current Measuring Adaptor
Measures up to 20A (and as low as 1 milliamp). Displays current in realtime. Adaptors work with all Power Probe circuit testers!
Others also bought
Power Probe Current Measuring Adaptor
Measures up to 20A (and as low as 1 milliamp). Displays current in realtime. Adaptors work with all Power Probe circuit testers!
More from this category
12V / 24V Battery Tester w/ Printer
Test battery charge / health for all 12V auto batteries and alternator / crank systems for 12V / 24V batteries, including new stop start batteries.
Print test results using the built in printer.
- Tests all main battery standards
- Max load voltage tests for 12V / 24V
- Short circuit / reverse polarity protection
ET4393-ADAP Promo
12V Brake & Clutch Pressure Bleeder | Digital
Single handed brake bleeding. Powered by the vehicle's own battery. No shop air required!
- Bleed pressure is closely controlled up to 3.0 bar - suitable for most vehicles (even those with ABS). Meets European OEM pressure requirements.
- Auto shut off function when pressure falls below 0.5 bar.
12V Lead Acid / Lithium Battery Analyser
A professional quality automotive battery tester for testing both 12V lithium ion and lead acid batteries. This tester uses conductance technology; a passive testing methodology which does not discharge / drain the battery. This analyser also checks the alternator's charging and starter's cranking condition.
- Tests all 12V lithium ion / lead acid batteries for cars / motor cycles.
- Print function via PC printer
- Testing range: Lithium ion 20- 1000CCA | Lead acid 20 - 2000CCA
12V Timing Light | Petrol
This petrol engine timing light is designed for professional use. Featuring multiple measurement modes and a rotating barrel for better aim at the timing market and LCD viewing angle.
- Tachometer: 249 to 9,990 RPM (± 1% Accuracy)
- Dwell: 0¡ to 180¡ / 2 - 12 cylinders (±1% Accuracy)
- Voltage: 10 - 16V DC (± 1% Accuracy)
- Advance Degrees (2 / 4 cycle DIS & Conventional): 0¡ to 90¡ ( ± 0.5¡ Accuracy)
12V Timing Light | Petrol
DC powered timing light for use on 12V petrol engines. High intensity prefocused flashes clearly pick up engine timing mark.
- Double check indicator tests for incorrect hook up or faulty Xenon tube
- Universal spark plug adaptor installs in seconds
- Replaceable Xenon flash tube
AC / DC 1000A True RMS Clamp Meter
This true RMS clamp meter provides accurate AC, AC/DC Current and Voltage readings regardless of waveforms. This meter can be used in most industrial and commercial applications where non-linear loads distort the Current or Voltage waveform.
- 30mm clamp opening
- 1000A current AC / DC
- 600V voltage AC / DC
- 4000 Digital display counts
- CAT III 600V rating