Plastic welders were designed to repair small to medium damage to components that would otherwise need to be replaced.
Now with a rechargeable lithium battery. Up to 150 staples in a single charge!
- For welding / repairing plastic parts, such as vehicle bumpers, cracks, broken fixtures etc
- Kit includes 9mm | 12mm welding tips, steel mesh (10cm x 6cm), ABS | PE | PP | PS welding rods
- FULLY PORTABLE
- REPAIR SMALL PLASTIC COMPONENTS
| SKU | ETPRO-PS |
| Barcode # | 9321280404991 |
| Brand | Endeavour |
| Product weight | 0.6200kg |
| Shipping weight | 0.620000kg |
12 Months
You may also like
Endeavour 80W Rechargeable Plastic Staple Kit
Introducing a new range of rechargeable soldering irons for more aggressive soldering needs. Featuring 80W soldering power - a 50% step up over our existing range. Extra large 2,400mAh Li-Ion battery allowing for extended use. Fast start up, and fast cooldown for more efficient / safer operation. Charging time 2.5 - 3 hours.
- 150W Hot staple tip
- 60W Plastic welding tip
- 60W Plastic welding tip with guide pipe
- Assorted staples / plastic rods
- 650 deg C max temperature
- Battery power indicator
- LED lights for illumination
- 17 tips available separately
Others also bought
Endeavour 12V | 24V Relay Tester
An essential diagnostic tool for testing potentially faulty relays. This tool tests both 12V / 24V relays, with four / five pins (not late model Ford 4 pin).
- Quickly test 4 types of electro mechanical relays
- Test relay coil resistance / relay contacts / cyclic testing
- Relay coil resistance 20 - 500 Ohms
More from this category
Butt Welding Clamp Set
Ensure a perfect welded butt joint. Holds panels edge to edge, with almost no gap. Level adjustment (0-3mm) allows flat alignment on top or bottom surface of panels. Set contains four clamps.
Endeavour 80W Rechargeable Plastic Staple Kit
Introducing a new range of rechargeable soldering irons for more aggressive soldering needs. Featuring 80W soldering power - a 50% step up over our existing range. Extra large 2,400mAh Li-Ion battery allowing for extended use. Fast start up, and fast cooldown for more efficient / safer operation. Charging time 2.5 - 3 hours.
- 150W Hot staple tip
- 60W Plastic welding tip
- 60W Plastic welding tip with guide pipe
- Assorted staples / plastic rods
- 650 deg C max temperature
- Battery power indicator
- LED lights for illumination
- 17 tips available separately
Exhaust Tailpipe Expander
A convenient tool for expanding tailpipes. Simply place inside the tailpipe and turn the inside hex nut to expand the diameter of the tube.
- 30 - 44mm diameter
- Extra long hex rod