Top of the range butane iron for the professional user. Patented LECª removable fuel cell for uninterrupted use, safety & reliability even at very lower temperatures. LECª refills easily with any brand of butane. LEC filters butane for no-clog operation.

Comes with soldering tips, safety wire stand, protective cap, solder, in a quality plastic case with foam insert.

• Automatic ignition
• 2 removable and refillable LEC (liquid energy cells)
• Includes solder, multiple tips, stand, protective cap and more
• Approximate tip temperature: 250 - 550 degrees C
• Torch temperature: 1300 degrees C

Introducing a new range of rechargeable soldering irons for more aggressive soldering needs. Featuring 80W soldering power - a 50% step up over our existing range. Extra large 2,400mAh Li-Ion battery allowing for extended use. Fast start up, and fast cooldown for more efficient / safer operation. Charging time 2.5 - 3 hours.

• 80W Chisel type tip
• 80W Cone type tip
• 90W Heat Shrink tip
• 90W Hot Knife
• 650 deg C max temperature
• Battery power indicator
• LED lights for illumination
• 17 tips available separately

Ensure a perfect welded butt joint. Holds panels edge to edge, with almost no gap. Level adjustment (0-3mm) allows flat alignment on top or bottom surface of panels. Set contains four clamps.

Introducing a new range of rechargeable soldering irons for more aggressive soldering needs. Featuring 80W soldering power - a 50% step up over our existing range. Extra large 2,400mAh Li-Ion battery allowing for extended use. Fast start up, and fast cooldown for more efficient / safer operation. Charging time 2.5 - 3 hours.

• 150W Hot staple tip
• 60W Plastic welding tip
• 60W Plastic welding tip with guide pipe
• Assorted staples / plastic rods
• 650 deg C max temperature
• Battery power indicator
• LED lights for illumination
• 17 tips available separately

Replacement chisel welding tip for the ETPRO-PS kit.

Plastic welders were designed to repair small to medium damage to components that would otherwise need to be replaced.

Now with a rechargeable lithium battery. Up to 150 staples in a single charge!

• For welding / repairing plastic parts, such as vehicle bumpers, cracks, broken fixtures etc
• Kit includes 9mm | 12mm welding tips, steel mesh (10cm x 6cm), ABS | PE | PP | PS welding rods

• FULLY PORTABLE
• REPAIR SMALL PLASTIC COMPONENTS

Replacement welding tip for the ETPRO-PS kit.

A convenient tool for expanding tailpipes. Simply place inside the tailpipe and turn the inside hex nut to expand the diameter of the tube.

• 30 - 44mm diameter
• Extra long hex rod