Essential test leads. Potentiometer | piercing probes | crocodile | flat terminals | signal tester and more.

• Potentiometer (variable resister) (1x)
• Signal tester / LED stroboscope (2x)
• Piercing probes (green / yellow)
• Test probe extension (2x)
• SRS (airbag) connector (1x)
• Crocodile clip adaptors (2x)
• Needle probes (4x)
• DMM test leads (2x)
• Banana plug extensions (4x)
• Flat terminals (8x)

A great value kit featuring the legendary Power Probe 3 - the digital voltmeter that also provides diagnostic power with the click of a switch. Includes deluxe lead kit, and ECT3000 circuit tracer and short finder. Essential tools for every technician.

Apply voltage from the Power Probe tip to quickly actuate components.

• Test circuits for voltage, continuity or polarity. Green / red LEDs provide quick confirmation.
• 6m heavy duty extension lead.

Measures up to 20A (and as low as 1 milliamp). Displays current in realtime. Adaptors work with all Power Probe circuit testers!

The PPPWM is an adapter that is plugged into Power Probe products with 4mm banana plugs (such as THE MAESTRO / PP4 / PP3 / PP3EZ etc).

The adapter can be set for the output 0-100% pulse width drive waveform by pressing the key. It is mainly used for automotive applications such as automotive fan circuit detection, to find the part of the circuit failure, in order to replace and repair.

Duty cycle adjustable 5% - 100%.

For 12V / 24V use. 10A max continuous output.

A 20 foot extension cable for Power Probe 3 circuit testers. Great for working on trucks, trailers and oversized vehicles.

• Original part # PN3049

20 foot extension cable for the Power Probe 4 / Maestro.

This clip set allows your Power Probe circuit tester to be powered from any 12V source. Suits all Power Probe 3 models only.

• Original part # PN3046

Replacement 3" probe tips, suitable for all Power Probe units. These are the original tips supplied with all Power Probe units. For a longer 6" tip, please refer to PPTK0043.

• With 4mm banana jack
• Original part # PN3015-BLK
• 2 pack

Connects to any Power Probe. Limits output voltage to 5V. Essential for safely testing sensors and computer circuits on vehicles. Now you can supply a 5V reference signal to test computer modules, wiring and the components connected to them.

This Power Probe kit contains two adaptors - a male / male and a female / female adaptor.  The 4mm connectors are suitable to use with all standard multimeters.

• male / male adaptor
• female / female adaptor