Silvertronic multimeter leads are made in the UK. Designed for professional use, Silvertronic silicone leads are double insulated.

Silicone leads can withstand high temperature, including the heat of such things as hot manifolds and soldering iron tips.

• 1000V CAT III 20A
• 2m long cables (colour coded)
• Extra thin 0.7mm OD
• Supplied in a 4 pocket test lead organiser for convenient storage.

A pair of double insulated silicone test leads one end terminating in a straight fixed shrouded plug, the other in a right angled plug, both compatible with standard 4mm instrument sockets.

• 1.2m length
• Made in UK quality

Perfect for connecting to fuel injectors, MAP and TPS sensors, as well as any weather pack seal type connectors. The modular design is compatible with any industry-standard, 4mm plug whether shrouded or not. All probes are supplied in a protective plastic tube.

• 4 colours | 0.7mm (0.028") OD back probe pins
• Made in UK quality
• 1000V CAT III 20A

Test battery charge / health for all 12V auto batteries and alternator / crank systems for 12V / 24V batteries, including new stop start batteries.

Print test results using the built in printer.

• Tests all main battery standards
• Max load voltage tests for 12V / 24V
• Short circuit / reverse polarity protection

Monitor battery status on all 12V automotive batteries. Wireless communication (up to 50m) by RF frequency. No need for cables / mobile phone app!

• Solar powered with internal battery (or charge via USB)
• Battery status (SOC / SOH / Voltage) etc. Plus check vehicle starting / charging systems.
• Easy dashboard mount / audible alerts.

A professional quality automotive battery tester for testing both 12V lithium ion and lead acid batteries. This tester uses conductance technology; a passive testing methodology which does not discharge / drain the battery. This analyser also checks the alternator's charging and starter's cranking condition.

• Tests all 12V lithium ion / lead acid batteries for cars / motor cycles.
• Print function via PC printer
• Testing range: Lithium ion 20- 1000CCA | Lead acid 20 - 2000CCA

State of the art rugged professional design. Highly accurate. Will test all 12V lead acid automotive batteries, and 12V / 24V charging / crank systems.

Scan QR code on tester to bring up test report on any smart phone / tablet, and then easily email / text / share the report.

Browser based - no app needed!

• Testing range: 100 2,000 CCA

This advanced system tester is designed to test all 12V auto batteries (lead, AGM, EFB, GEL etc) including stop / start batteries. The unit tests battery condition PLUS charging (alternator) and starter (crank) systems.

The battery test analyses battery health status to calculate actual cold cranking capability of the battery. The tester will advise whether the battery needs replacing, and is also able to identify a faulty battery before actual failure.

The cranking test analyses the starting circuit (including the starter motor) by measuring increases in starting torque load. The charging test analyses the charging system, detecting under or overcharging.

• Testing range: 100 - 2,000CCA
• Powered from vehicle's 12V battery | no internal battery required

A precision instrument to accurately measure the strength of battery fluid, screenwash, antifreeze (including synthetics) and aqueous / urea AdBlue^¨ content. A very versatile unit, especially with the ability to measure AdBlue concentration.

• Temperature corrected prism for improved accuracy
• Adjustable focus eyepiece
• Simple calibration using distilled water
• Supplied with pipette & storage case