A pair of double insulated silicone test leads one end terminating in a straight fixed shrouded plug, the other in a right angled plug, both compatible with standard 4mm instrument sockets.

• 1.2m length
• Made in UK quality

Perfect for connecting to fuel injectors, MAP and TPS sensors, as well as any weather pack seal type connectors. The modular design is compatible with any industry-standard, 4mm plug whether shrouded or not. All probes are supplied in a protective plastic tube.

• 4 colours | 0.7mm (0.028") OD back probe pins
• Made in UK quality
• 1000V CAT III 20A

A comphrehensive kit containing the I-Tester plus all necessary accesories to test:

- Relative compression via Current or Volts

- Synced compression test (allows you to know which cylinder(s) is low on compression.)

- Actual common rail fuel pressure sensor readings.

Kit includes:

• ET0090 I-Tester
• Inductive pick up clamp
• OBDII compression test adaptor
• 10:1 Voltage attenuator
• Back probe needles
• Alligator clips

• IEC 1010 rating: 1000V CATIII double / reinforced insulation 20A
• Threaded contact
• 2.0m double insulated silicone cable
• Bi coloured layers

The Power Probe Digital Clamp Meter is an 80 Amp, auto-ranging clamp meter designed specifically for the automotive technician. This meter is rated CAT III 600V and can measure Volts, Amps, Ohms, Frequency and Temperature, necessary for automotive electrical testing. This meter's diagnostic applications include (but are not limited to) Parasitic Draw, Crank Current testing and HVAC Temperature testing.

Supplied with 3x AAA batteries.

• Voltage: AC 600V | DC 600V
• Current: AC 80A | DC 80A
• Display 4000 counts
• Jaw Opening 24mm/0.9"
• Auto & Manual Ranging
• Auto Power Off / Non-Contact Voltage Detector
• Diode Open Voltage 3.2V
• Continuity Buzzer <50
• Data Hold
• Large LCD Display Backlight
• Work Light
• Low Battery Display

An incredibly handy set of wheel nut sockets. These sockets are new half size sockets for chrome covered nuts which have become swollen / warped.

Inflated / warped chrome plated caps are a common problem, especially on some Ford vehicles. Standard sized wheel nut sockets will not fit, and a half sized variant is required.

The 19.5mm socket is designed for VW Amarok vehicles.

• Thin wall impact sockets (with protective sleeve)
• 18.5mm | 19.5mm diameter
• 6 point sockets
• 1/2" Sq Drv

Handy lead set that allows you to plug into the cigarette adaptor to read battery voltage etc.

Compatible with standard multimeter plugs.

A current looper for use with clamp meters for electrical circuit fault diagnosis.

• Suits mini type automotive fuses.
• Inline fuse holder for original fuse.
• For diagnostic testing.

A current looper for use with clamp meters for electrical circuit fault diagnosis.

• Suits standard automotive fuses
• Inline fuse holder for original fuse
• For diagnostic testing

Use with clamp meters for electrical circuit fault diagnosis. An efficient way to monitor amperage draw through a fused circuit

• Inline fuse holder for original fuse

Break into the fuse panel quickly & easily. 4mm banana connectors. For use with standard multimeters.

• Maxi blade fuses
• 20A / 12 - 48V DC measuring range
• +/- 2% accuracy

Break into the fuse panel quickly & easily. 4mm banana connectors.
For use with stanadard multimeters

• Mini blade fuse
• 20A / 12-48V DC measuring range
• +/- 2% accuracy