An extra long thin wall socket for deeply recessed hub nuts. Also suitable for adjusting the free play in wheel bearings on Landcruiser / Nissan Patrol.
This socket is turned by inserting a tommy bar or large screwdriver through the cross drilled holes at the opposite end to the hexagonal head.
- 54mm dia | 6 Pt
- 165mm depth | 180mm OL
- Applications: Landcruiser 40/60/70/80/100 Series | Nissan Patrol Y60/GQ/MQ/MK.
- 1/2" Sq Drv
| SKU | ET9062A |
| Barcode # | 9321280349735 |
| Brand | Automotive |
| Product weight | 0.9740kg |
| Shipping weight | 0.974000kg |
| Vehicle Make | Toyota |
| Vehicle Make | Nissan |
12 Months
You may also like
Hub Nut Socket | 55mm
Wheel bearing locknut socket for front wheel adjusting nuts on Landcruiser 40 | 60 | 70 | 80 | 100 Series
- 55mm | 6 Point hex
- 85mm depth
- Thin wall
- 1/2" Sq Drv
Hub Nut Socket 50mm (2") 6 Pt Hex
Specially designed socket for wheel bearing locknuts. Use with a torque wrench, or extension.
- 2" diameter
- 6 point hex
- 90mm depth
- 1/2" Sq Drv
More from this category
Ford Transit Rear Hub Nut Socket (2014 Onwards)
A special 4 pin impact socket for removing the rear hub nut on RWD Ford Transit (>2014). The alignment shaft allows accurate location onto the castellated nut.
- 19mm hex drive
- 6.8mm stud width
- Outer rim: 69.5mm
- OEM Equiv: 205-1007
Front Hub Nut Socket
Specialised front hub nut socket for servicing the front hub lock nut on Toyota 2WD trucks (07-). The socket has 8 pins, and is designed for use with impact tools.
- 3/4" Sq Drv
- OEM Equiv: 09318-12010 8 Pin
- Applications: 4Runner (07-14) | Sequoia (08-14) | Tundra (07-14)
Hub Nut Socket | 40mm | Deep
A specialised 6 point deep impact socket suitable for use on hub nuts on Peugeot vehicles.
- 40mm diameter | 6 Point
- Deep impact socket
- 1/2" Sq Drv
Hub Nut Socket | 55mm
Wheel bearing locknut socket for front wheel adjusting nuts on Landcruiser 40 | 60 | 70 | 80 | 100 Series
- 55mm | 6 Point hex
- 85mm depth
- Thin wall
- 1/2" Sq Drv
Hub Nut Socket | 56mm | Deep
A specialised bi-hex deep socket that is commonly used on Ford Transit 130 | 150 | 190 vehicles (1993 onwards) and swing arm / axle nuts on Ducati / Augusta motorcycles.
- 56mm dia | 12 Point
- 3/4" Sq Drv
Hub Nut Socket | 65mm | Deep
A thin wall hub nut socket designed to suit many applications, including 65mm Ford Transit rear hubs (before 1993).
- Size: 65mm (2-9/16") (Outside dia: 84mm)
- 6 point (single hex)
- 3/4" Sq Drv