A specialised kit for removing seized injectors from Ford 2.0L EcoBlue engines, from approximately 2016 onwards. Injector removal is necessary for any service tasks that require the removal of the cam cover, cylinder head or cam shafts.
IMPORTANT NOTE: This kit is designed to remove seized injectors only. Using this kit will render any injector inoperable.
- Always ensure that the force screw is properly lubricated.
- OEM Equiv: 303-1690
Engine Code(s)
T8MA, T8MB, T7DB, T8CF, YNF6, YMF6, YNR6, BCCA, YNWS, YN2S, BLFB, BLRA, BCFB
| Vehicle Make | Model | Series | Engine Code | Engine Size | Year Start | Year End |
| Ford | Endura | CA | BCCA | 2.0L | 2018 | 2021 |
| Ford | Transit Custom | VN | BCFB | 2.0L | 2019 | |
| Ford | Transit | VO | BLFB | 2.0L | 2019 | |
| Ford | Transit | VN | BLFB | 2.0L | 2019 | |
| Ford | Transit Custom | VN | BLFB | 2.0L | 2019 | |
| Ford | Transit | VO | BLRA | 2.0L | 2018 | |
| Ford | Focus | LZ | T7DB | 2.0L | 2014 | 2019 |
| Ford | Mondeo | MD | T8CF | 2.0L | 2015 | |
| Ford | Escape | ZG | T8MA | 2.0L | 2016 | 2018 |
| Ford | Escape | ZG | T8MB | 2.0L | 2016 | 2020 |
| Ford | Kuga | TF | T8MB | 2.0L | 2014 | 2016 |
| Ford | Transit | VN | YMF6 | 2.0L | 2016 | 2019 |
| Ford | Transit Custom | VN | YMF6 | 2.0L | 2016 | 2019 |
| Ford | Ranger | PX3 | YN2S | 2.0L | 2018 | 2022 |
| Ford | Ranger | PY, T6.2 | YN2S | 2.0L | 2022 | |
| Ford | Transit | VO | YNF6 | 2.0L | 2016 | |
| Ford | Transit | VO | YNR6 | 2.0L | 2017 | |
| Ford | Everest | UA | YNWS | 2.0L | 2018 |
303-1690
| SKU | ET8912 |
| Barcode # | 9321280413139 |
| Brand | Automotive |
| Product weight | 0.9500kg |
| Shipping weight | 0.950000kg |
12 Months
More from this category
17T Hydraulic Injector Extractor Kit
A specialised kit that assists with the extraction of very tight fitting injector nozzles, utilising a special pull spindle. Contains a 17T hydraulic ram, with 15mm stroke. Height retracted 89mm | extended 104mm.
This kit is designed to be used with a bridge, and injector pullers. These are available separately.
- M14 x 1.5 pitch Pulling Spindle 240mm long.
- M14 x 1.5 pitch Pulling Spindle 315mm long.
- M17 x 1.0 pitch Pulling Spindle 240mm long.
- M17 x 1.0 pitch Pulling Spindle 315mm long.
- M18 x 1.5 pitch Pulling Spindle 315mm long.
- M25 x 1.0 pitch Pulling Spindle 240mm long.
BMW Diesel Injector Removal Kit
A specialised kit for removing BMW diesel injectors in vehicles with M47 | M57 engines, without having to remove the cylinder head.
The special extraction bridge and pull spindle allows for quick / safe injector removal.
To avoid the risk of impurities entering the combustion chamber during the cleaning process, we strongly suggest the use of a compressed air adaptor.
- Engine codes: M47TU | M57 | M57TU
- Spindle 16 (one side M17) for mounting in the injector
- 29mm socket for disassembling the electric unit
- Internal 6 Pt wrench for removing the injector needle
BMW N55 Injector Removal Tool
A specialised tool for late model BMW N55 petrol engines to safely / quickly install / remove the fuel injectors. For earlier N55 engines (before July 2013) please refer to ET1539A.
- Application: BMW 3.0L (2008 - 2016)
- Engine: N55 (from July 2013 onwards) - up to engine # 14407684
- OEM equiv: 130270 (13 0 270)
Bosch / Lucas Diesel Injector Puller
Kit consists of a slide hammer with adaptors to assist the removal of stubborn Bosch and Lucas diesel injectors.
- Adaptors: M8 P0.75 (male) | M12 P1.5 (Bosch) | M14 x P 1.5 (Volvo / Scania)
- Slide hammer thread: M12 | 175mm length (without adaptors).
Bosch Injector Removal Kit
Specialised kit for demounting stuck injectors (mainly Bosch) without removing the cylinder head. Wide coverage on 1.3L - 2.2L diesel engines.
Chrysler Injector Puller | 2.5L | 2.7L
This specialised injector puller is designed to safely extract tightly stuck injectors on Chrysler 2.5L | 2.7L CRD 16 valve VM engines.