Hyundai / Kia HEV PHEV Flywheel Locking Kit
SKU: ET8852
Automotive
Automotive
A specialised flywheel locking kit for Hyundai / Kia HEV and PHEV vehicles.
The kit is designed to lock into the rear of the flywheel (drive plate) from under the vehicle. This locks the engine allowing for the removal / installation of the crankshaft pulley.
- Applications: HEV / PHEV - Hyundai Sante Fe | Tucson, KIA Sorento | Sportage
- OEM equiv: 09231 3D200 (092313D200)
03231 3D200
SKU | ET8852 |
Barcode # | 9321280425866 |
Brand | Automotive |
Product weight | 0.5000kg |
Shipping weight | 0.500000kg |
Vehicle Make | Hyundai / Kia |
12 Months
Others also bought
Digital Manometer | 100kPa
Industry leading live graphing on colour screen.
100kPa pressure range, with adaptor kit included.
Use with scan tool live data to compare with actual pressure readings.
An essential workshop tool.
- Inlet manifold pressure
- DPF pressure gradient
- Turbo output pressure
Vehicle Ride Height Gauge
Many late model vehicles require that the ride height be checked / set correctly to ensure that ADAS systems function correctly. Our tool measures ride height either under the sills, or under vehicle centre (without needing to crawl under the vehicle).
- Measures from 51 - 350mm
- Magnetic tape measure to allow ride height to be adjusted, while making measurements
- Ensure vehicle is on level ground before taking any measurements
More from this category
Air Boy Bent Pipe Safety Blow Gun
High airflow | Low noise level | Unblockable | Integrated chip shield
- 600l / min @ 8 bar
- 78 db @ 6 bar
- OSHA STD 1-13.1 compliant
- Industry leading airflow for a low noise blow gun
Air Boy Spray Bottle | General Use
European made quality!
Two variants - one for light solvents / other for general use.
- Trigger with filter
- Matt top cover
- ML & OZ scale
- Stable base
Air Boy Spray Bottle | Solvents
European made quality!
Two variants - one for light solvents / other for general use.
- Trigger with filter
- Matt top cover
- ML & OZ scale
- Stable base
Bearing Removal Adaptor Kit
A specialised adaptor kit to remove / install front and rear wheel bearings with spindles, on the vehicle. Designed to reduce the chance of damage to the hub and bearing, while saving time. Sleeves fit most standard wheel bearing sizes.
- Suitable for use with impact wrench
- Applications: Mercedes, BMW, VW, Audi, Porsche, Volvo, Toyota, Lexus, Nissan, Infiniti, Honda, Acura
BMW Mini High Pressure Fuel Line Disconnect Tool
Don't try removing fuel lines without this tool! Specially designed to make it quick and easy to disconnect the high pressure fuel line, which is near the firewall.
- Engines: BMW Mini N13 / N18
- Applications: BMW / Mini 1 & 3 series F20 / F30
- OEM equiv: 8330496242