Next gen technology! Use App to REMOTELY CONTROL multimeter, log data, graph live data etc. Ideal for hazardous environments, remote measurement (eg trucks) etc. 1000V CAT III

• Battery included

Download the App on the App store

Next generation multimeter. Auto / manual ranging. Push button function selection. Highly accurate 9999 counts triple display. Non contact voltage. Backlight

A superb unit!

Test battery charge / health for all 12V auto batteries and alternator / crank systems for 12V / 24V batteries, including new stop start batteries.

Print test results using the built in printer.

• Tests all main battery standards
• Max load voltage tests for 12V / 24V
• Short circuit / reverse polarity protection

A professional quality insulation tester with inbuilt true RMS multimeter. This tool is ideal for testing the insulation of the high voltage wires used on hybrid vehicles.

This tester conforms to EN61010 CAT III (1000V) and CAT IV (600V).

• IP67 waterproof rating
• Use as a standalone device, or link wirelessly to a computer to save / print results
• Supplied with high voltage probes, thermocouple and wireless USB cable.

This product is designed for use in monitoring car battery voltage, leakage current, and serving as a backup power supply when replacing the battery. The product is connected to the car's OBDII interface via an OBDII connection cable to supply 12V power to the car and monitor the car system's leakage current for diagnosing various faults. It can also serve as a backup power supply for the car during battery replacement, preventing the car's mainboard from losing power and data. Draw Monitor can also monitor battery voltage through the OBDII port. Please read the instruction manual carefully before using the product.

• Supplies up to 10 amps
• Connects via OBDII
• View and record data via Bluetooth on App
• USB-C rechargeable
• Adjustable current output alarm & adjustable auto power off setting
• Graphing mode
• Monitor function input: 0-30V
• Voltage display accuracy: 1%+5dig resolution 0.1V
• Current display accuracy: 3%+5dig resolution 1mA

Test battery charge / health for all 12V auto batteries and alternator / crank systems for 12V / 24V batteries, including new stop start batteries.

Print test results using the built in printer.

• Tests all main battery standards
• Max load voltage tests for 12V / 24V
• Short circuit / reverse polarity protection

Monitor battery status on all 12V automotive batteries. Wireless communication (up to 50m) by RF frequency. No need for cables / mobile phone app!

• Solar powered with internal battery (or charge via USB)
• Battery status (SOC / SOH / Voltage) etc. Plus check vehicle starting / charging systems.
• Easy dashboard mount / audible alerts.

A professional quality automotive battery tester for testing both 12V lithium ion and lead acid batteries. This tester uses conductance technology; a passive testing methodology which does not discharge / drain the battery. This analyser also checks the alternator's charging and starter's cranking condition.

• Tests all 12V lithium ion / lead acid batteries for cars / motor cycles.
• Print function via PC printer
• Testing range: Lithium ion 20- 1000CCA | Lead acid 20 - 2000CCA

Advanced tester for 12V motorcycle batteries. Tests battery condition. Prints test reports via PC.

Simply enter the battery rating (printed on the battery) and test results are showing on the LCD screen.

• Testing range: 20 - 300 CCA

State of the art rugged professional design. Highly accurate. Will test all 12V lead acid automotive batteries, and 12V / 24V charging / crank systems.

Scan QR code on tester to bring up test report on any smart phone / tablet, and then easily email / text / share the report.

Browser based - no app needed!

• Testing range: 100 2,000 CCA

This advanced system tester is designed to test all 12V auto batteries (lead, AGM, EFB, GEL etc) including stop / start batteries. The unit tests battery condition PLUS charging (alternator) and starter (crank) systems.

The battery test analyses battery health status to calculate actual cold cranking capability of the battery. The tester will advise whether the battery needs replacing, and is also able to identify a faulty battery before actual failure.

The cranking test analyses the starting circuit (including the starter motor) by measuring increases in starting torque load. The charging test analyses the charging system, detecting under or overcharging.

• Testing range: 100 - 2,000CCA
• Powered from vehicle's 12V battery | no internal battery required