For new generation COMPACT impact wrenches.

All ESSENTIAL sizes, especially 15mm for Commodore harmonic balancers.

• 6 Point
• Chrome moly impact sockets
• Sizes: 13mm - 19mm, 21mm, 22mm, 24mm
• 1/2" Sq Drv

Cutting edge technology delivers a massive 1,275Nm breakaway torque in a super compact, lightweight tool. Only 92mm long, and weighing less than 1.35kg. Ergonomically designed, with rubber grip. Single handed forward / reverse for easy one handed use. Composite body. Backed by a 24 month warranty.

Ideal for use in tight spaces.

• 1/2" Sq Drv
• Length: 92mm
• Jumbo hammer
• Breakaway torque: 1,275Nm
• Working Torque: 25-320 Ft Lb (34-434 Nm)

A heavy duty diesel injector puller kit for disassembling / removing stuck injectors.

This kit has broad application including Bosch / Delphi injectors.

Includes universal joint to provide better access to hard to reach areas, and an M18 >> 5/8-18 UNF adaptor (to use with standard slide hammers).

• Hex bit sockets: ¿7.6, ¿6.6
• Universal joint: M18 x 1.5
• Special hex sockets: 25mm, 27mm, 29mm, 30mm
• Injector grippers: 12mm, 13.5mm, 16mm, 26mm
• Pull spindles: OT-M14 x 1.5, OT-M16 x 1.5, IT-M16 x 1.0, ITM17x 1.0, IT-M20 x 1.0, IT-M25 x 1.0, IT-M27 x 1.0, OT-M25 x 0.5,OT-M25 x 0.75, OT-M27 x 1

This new addition to our Foxwell range combines an OBDII code reader, with a 12V battery tester in one convenient tool.

The OBDII code reader is compatible with all OBDII compliant vehicles, and reads / clears engine codes and turns off the Check Engine light. Plus the code reader has a built in trouble code database, and offers Automatic VIN recognition.

The 12V battery tester analyses the state of health on all common automotive batteries including AGM / Flooded / Gel batteries. Test reports can be printed via a PC.

• 100 - 1,100CCA battery range
• Lifetime free updates

Test battery charge / health for all 12V auto batteries and alternator / crank systems for 12V / 24V batteries, including new stop start batteries.

Print test results using the built in printer.

• Tests all main battery standards
• Max load voltage tests for 12V / 24V
• Short circuit / reverse polarity protection

This pressure brake bleeder is designed to be portable, being powered by the vehicle's 12V battery. No shop air required!

Features adjustable output pressure up to a maximum 3.0 bar, with automatic cut-off function when pressure falls below 0.5 bar.

Supplied with premium quality adaptor set made from metal, not plastic.

• Suitable for both hydraulic brake and clutch systems.

This petrol engine timing light is designed for professional use. Featuring multiple measurement modes and a rotating barrel for better aim at the timing market and LCD viewing angle.

• Tachometer: 249 to 9,990 RPM (± 1% Accuracy)
• Dwell: 0¡ to 180¡ / 2 - 12 cylinders (±1% Accuracy)
• Voltage: 10 - 16V DC (± 1% Accuracy)
• Advance Degrees (2 / 4 cycle DIS & Conventional): 0¡ to 90¡ ( ± 0.5¡ Accuracy)

This true RMS clamp meter provides accurate AC, AC/DC Current and Voltage readings regardless of waveforms. This meter can be used in most industrial and commercial applications where non-linear loads distort the Current or Voltage waveform.

• 30mm clamp opening
• 1000A current AC / DC
• 600V voltage AC / DC
• 4000 Digital display counts
• CAT III 600V rating

This advanced system tester is designed to test all 12V auto batteries (lead, AGM, EFB, GEL etc) including stop / start batteries. The unit tests battery condition PLUS charging (alternator) and starter (crank) systems.

The battery test analyses battery health status to calculate actual cold cranking capability of the battery. The tester will advise whether the battery needs replacing, and is also able to identify a faulty battery before actual failure.

The cranking test analyses the starting circuit (including the starter motor) by measuring increases in starting torque load. The charging test analyses the charging system, detecting under or overcharging.

• Testing range: 100 - 2,000CCA
• Powered from vehicle's 12V battery | no internal battery required

A professional quality kit for removing aftermarket wheel lock nuts. This kit includes a wide range of sockets / bits for removing locking wheel nuts.

• See download link for detailed socket listing
• Made from Chrome Vanadium steel for added durability