This practical tool helps test diesel injectors for leakage, spray patterns, opening pressure, and leakage between injector needle and injector body.

Suitable for pressure-activated injectors. An electronic switching device (ET6632) is needed for this unit to be able to test common rail type injectors.

• With transparent tank and two connecting pipes - M12 | M14
• Pressure range: 0-600 Bar (0-8700 PSI)

Measures up to 20A (and as low as 1 milliamp). Displays current in realtime. Adaptors work with all Power Probe circuit testers!

The PPPWM is an adapter that is plugged into Power Probe products with 4mm banana plugs (such as THE MAESTRO / PP4 / PP3 / PP3EZ etc).

The adapter can be set for the output 0-100% pulse width drive waveform by pressing the key. It is mainly used for automotive applications such as automotive fan circuit detection, to find the part of the circuit failure, in order to replace and repair.

Duty cycle adjustable 5% - 100%.

For 12V / 24V use. 10A max continuous output.

Professional quality for cleaning / testing petrol inejctors including new GDI type.

• Suits Low / High resistance PFI, GDI Peak & Hold and GDI Piezo
• Conduct sprayability and leakage tests
• Adjustable test voltage from 12V - 170V. Adj current from 3 - 20A. Maximum power: 150W
• Pulse width: 4,000 - 9,000uS
• Pressure: from 1 - 20 Bar
• 60W ultrasonic cleaner

Next generation automotive signal generator - to simulate SENSORS and ACTUATORS.

Quickly detect whether the ECU, a feed, plug in connection, or sensor is defective. Eliminate faults without simply replacing parts on suspicion only.

• Operates on 12V & 24V systems
• Signal generator: sine, square, triangles and ramps; 0.1Hz - 20kHz
• PWM generator (up to 4A): Dynamic control of vehicle, actuators using pulse width modulation

This unit allows the Exhaust Gas Recirculation (EGR) valve to be open / closed to assist with removing carbon deposits with an ultrasonic cleaner, or to check operation. Be careful not to submerge electronic components.

Includes connectors to suit a range of EGR makes including Bosch, Delphi, Denso.

Six channels of adjustable signal output. Drives all petrol / diesel injectors includ- ing PFI . FSI / TFSI / GDI / Piezo etc.

• Actuate injectors for cleaning
• Use with old PFI testers to test GDI

Professional quality for cleaning / testing petrol inejctors including new GDI type.

• Suits Low / High resistance PFI, GDI Peak & Hold and GDI Piezo
• Conduct sprayability and leakage tests
• Adjustable test voltage from 12V - 170V. Adj current from 3 - 20A. Maximum power: 150W
• Pulse width: 4,000 - 9,000uS
• Pressure: from 1 - 20 Bar
• 60W ultrasonic cleaner

Diagnose all type of IR (Infra Red) | RF (Radio Frequency) remote controls, including automotive key fobs and infrared controllers. Simply place remote control below the LCD screen, press the remote button, and the frequency will be displayed on the LCD screen.

• Applications include: Automotive key fobs, garage door remote controls, air conditioner remote controls etc
• Frequency range: 10Mhz - 1,000Mhz

Super sensitive stethoscope kit to quickly identify sources of noise, harshness or vibration.

Especially well suited for road testing / diagnosing simultaneously.

6 channel selector unit, with 6 pick up sensors and extra long cords.

Cushioned headphones.