Specialised Ribe impact socket for removing flywheel fixing bolts on Nissan / Renault M9R 2.0L DCi engines.
- M11 Ribe
- 78mm overall length
- 1/2" Sq Drv
- Chrome Moly
Engine Code(s)
M9R.817, M9R.780/6, M9R
| Vehicle Make | Model | Series | Engine Code | Engine Size | Year Start | Year End |
| Holden | Vivaro | M9R | 2.0L | 2008 | 2010 | |
| Renault | Koleos | HZG | M9R | 2.0L | 2017 | |
| Nissan | X-Trail | T31 | M9R | 2.0L | 2008 | 2015 |
| Renault | Megane | X84 | M9R.724 | 2.0L | 2008 | 2010 |
| Renault | Espace | M9R.740 | 2.0L | 2006 | 2008 | |
| Renault | Trafic | X83 | M9R.780/6 | 2.0L | 2007 | 2015 |
| Renault | Laguna | X91 | M9R.800 | 2.0L | 2008 | 2011 |
| Renault | Laguna | X91 | M9R.816 | 2.0L | 2008 | 2010 |
| Renault | Latitude | X43 | M9R.817 | 2.0L | 2011 | 2016 |
| Renault | Koleos | H45 | M9R.830 | 2.0L | 2008 | 2016 |
| Renault | Koleos | H45 | M9R.832 | 2.0L | 2009 | 2013 |
| SKU | ET5070 |
| Barcode # | 9321280326514 |
| Brand | Automotive |
| Drive | 1/2" Sq Drv |
| Points | 6 Point |
| Style | Impact |
| Type | Ribe |
| Vehicle Make | Renault |
| Vehicle Make | Nissan |
| Vehicle Make | Holden |
| Size | M11 |
| Length | 78mm |
| Material | S2 Steel |
12 Months
Others also bought
Brake Caliper Socket Set
Special truck brake caliper sockets for repairing SAF | NFZ | Knorr brake caliper systems.
- Sizes: Hex: 8mm | 10mm, Square: 8mm, 11 Point
- 12mm hex drive
Torx Plus Impact Socket | T50 | 78mm
A high quality single piece / impact grade Torx Plus socket (not to be confused with a standard Torx T50!). Used primarily for Subaru / Nissan dual mass flywheel.
- T50IP Torx Plus
- 78mm overall length
- 1/2" Sq Drv
- Chrome Moly construction
Torx Plus Impact Socket | T55 | 78mm
A high quality single piece / impact grade Torx Plus socket. Used primarily for Suburu bell housing. And also Navara D23 / D40 flywheel bolts, and Ford F Series seat bolts.
- T55 Torx Plus
- 78mm overall length
- 1/2" Sq Drv
- Chrome Moly construction
More from this category
Female Ribe Socket | M10S
This M10S female ribe socket has a wide variety of automotive applications, including removing the retaining screw on Toyota idler pulley belt, in order to be able to adjust the idler belt.
On Toyota (most) 1ZZFE / (all) 2ZZGE engines, this socket fits the bolt that secures the pulley to the belt tensioner. If your pulley has an exposed bolt this is the right tool. If your 1ZZ pulley has a black plastic cap covering the bolt head then it is more likely to be a standard Torx bolt.
- Applications: Toyota 1.8L 1ZZFE (98-08) / 2ZZGE / 2AZ-FE / 2AR-FE / 1AR-FE / 2GR-FE
- M10 female ribe socket
- 1/2" Sq Drv
Female Ribe Socket | M12S
This female ribe socket is used for adjusting the M12S bolt on the idler belt on Nissan vehicles, and head bolts on E16S engines (from 1987). This socket is also suitable for any other applications requiring a 16mm ribe socket.
- M12S Ribe impact socket (to suit 16mm ribe bolts)
- 38mm length
- 1/2" Sq Drv
Female Ribe Socket | M6
This socket is suitable for various engine repairs on Nissan vehicles. Also suits Volvo S40 variable pulley.
- M6 female Ribe
- 1/2" Sq Drv
- 38mm overall length
Female Ribe Socket | M8
This socket is suitable for various engine repairs on Nissan vehicles.
- M8 female Ribe
- 1/2" Sq Drv
- 38mm OL
Ribe (Female) Impact Socket Set (4 Pce)
Specialised female ribe sockets in 1/2" Sq Drv for clutches, cylinder heads and balance shaft fixings. Commonly used on Nissan / Renault vehicles, and Toyota idler pulley belts.
Impact grade for use with air tools.
- M6 | M8 | M10 | M12 Female ribe sockets
- 1/2" Sq Drv
- Chrome Moly construction
Ribe Bit Socket | M7 | 200mm
A specialised Ribe bit socket for headlight alignment on Alfa / Fiat vehicles. Also suitable for other applications requiring an M7 Ribe bit.
- M7 Ribe bit socket
- 200mm overall length
- 3/8" Sq Drv