Our new updated radiator pressure test kit sets the new industry benchmark!

Faster, easier, and more comfortable to use, than existing kits.

Perform cooling system leak tests, vacuum type coolant refills, and leak tests on radiator caps.

• Updated adaptors (more coverage than older kits) - includes new Volvo Hybrids
• Updated pressure pump, coolant refill and adaptor design
• Faster refill speed - 91 ml / sec vs 37 ml
• Connectors are compatible with superceded adaptor kits

Adjustable jaws fit all hexagon (49 - 135mm) & octagon (49 - 143mm) wheel bearing lock nuts. Contains three sets of pins, applicable to any pin holes on the nut.

• 6 Point lock nuts: 1-3/4" - 5-3/4" (49 - 135mm)
• 8 Point lock nuts: 1-3/4" - 5-5/8" (49 - 143mm)
• Pin diameters: 1/4" | 5/16" | 3/8"

A specialised adaptor kit to remove / install front and rear wheel bearings with spindles, on the vehicle. Designed to reduce the chance of damage to the hub and bearing, while saving time. Sleeves fit most standard wheel bearing sizes.

• Suitable for use with impact wrench
• Applications: Mercedes, BMW, VW, Audi, Porsche, Volvo, Toyota, Lexus, Nissan, Infiniti, Honda, Acura

This specialised tool locks the drive flange to prevent rotation when servicing the inner drive shaft mounting bolts / hub nuts.

The specially designed plastic wheels wedge between the brake caliper and the drive flange, using the vehicle's own wheel bolts or nuts.

• Allows easy removal of driveshaft / hub fixings.

• One man operation.

A specialised kit for servicing Gen II wheel hubs / bearings on Ford | Volvo vehicles with 78mm diameter front wheel bearings. These tools ensure that the insertion loads are taken only on the outer race of the bearing. Gen II wheel bearings are a wheel bearing / drive flange that cannot be separated.

Always adequately lubricate threaded force screws and thrust bearings.

• 78mm dia front bearings
• Applications: Ford: Focus II (LS / LT) | C-Max, Mazda: 3 (BK / BL), Volvo: C30 | C70 | S40 | V50

An essential time saving service kit for working on Transit (>06) wheel bearings and brakes on the front axle. Permits correct dismantling of the wheel bearing, with hub and brake disc.

Ford Transits (from 2006) have a design whereby the brake disc is positioned behind the wheel hub. Accordingly every brake disc changes requires the wheel bearing housing with wheel hub to be first removed.

• Removal of wheel bearing housing with hub
• Changing of brake disc
• Changing of wheel bearings
• Removal of the bearing inner race from hub

A specialised kit for servicing Gen II wheel hubs / bearings on Ford vehicles with 82mm diameter front wheel bearings. These tools ensure that the insertion loads are taken only on the outer race of the bearing. Gen II wheel bearings are a wheel bearing / drive flange that cannot be separated.

Always adequately lubricate threaded force screws and thrust bearings.

• 82mm diameter