Specialised calipers for measuring brake drums. Digital display for convenient usage.

This product uses button batteries.

• Measurement range: 0-300mm
• Resolution: 0.01mm
• Accuracy: 0.01mm

A combination air / hand powered pump for quickly extracting brake fluid, coolant, engine oil, transmission fluid etc. Do not use to extract petrol.

An optional hose to bleed brakes (with brake nipple connector) - ET3586-BRAK is also available.

• Massive 10L capacity avoids the need to remove drain plugs etc
• Supplied with 4 suction tubes (6mm oil | 7mm oil | brake fluid connector | 10mm gear oil)

Composite sharks teeth rack with magnetic strips. Holds 20 spanners.

• 20 Slots
• Magnetised

Specialised digital drum brake calipers to accurately measure drum brake wear. Suitable for vehicles with drum brakes up to 500mm in diameter.

For cars / SUVs, refer ET3565 which has a range of 0 - 300mm.

These calipers use an SR44 button battery which is not supplied with the unit. Designed for trade use only.

• 0 - 500mm
• Resolution: 0.01mm

This pen style tool tests the percentage of water in brake fluid, and tests all essential profiles for modern brake fluids. Please refer to the DOWNLOAD tab for a detailed instruction sheet.

• Colour coded LEDs show water level
• DOT 3 | DOT 4 | DOT 5.1
• Not suitable for silicone based DOT 5.0
• Rechargeable Li-ion battery

Pocket sized 5" pry bars, with stainless steel pocket clip. Multiple workshop applications!

Manufactured from high tensile alloy steel.

• Straight pry bar
• Angled pry bar 27 degrees
• Angled pry bar 55 degrees

Accurately measure brake disc diameter without removing wheels. Quick identification of the brake system. Saves time!

• Suits most passenger / light commercial vehicles
• Range: 200 - 400mm
• Reach: 265mm

These colour coded gauges help identify brake lining that may require replacement. Quickly assess brake pad thickness on disk brakes, by inserting the blade between the brake disc and brake pad.

Traffic light like colour coding - Green / Go, Yellow / Caution, Red / Replace

• Colour coded metal gauges
• Measuring range: 2mm - 12mm

A specialised brake wear gauge for use on heavy vehicles to check the thickness of remaining brake pad material.

An offset design allows for the blades to be inserted between the brake disc and the brake pad backing plate so that the pad thickness can be measured without the pad needing to be removed from the vehicle.

• 9 blades marked in both metric & imperial units. Range: 6 - 22mm (0.2362" - 0.8661").
• Always consult manufacturer's recommended measurements for brake pad replacement; many duty manufacturers recommend pad replacement at around 5mm.

Quickly / simply measure trending brake thickness without removing any components.

Place the end of this lightweight gauge against the brake disc surface; slide back the measuring peg until it stops against the back plate of the brake pad. Read off the thickness of the pad material in mm.

• Colour coded green | yellow | red traffic-light symbol as to whether you need to replace the brake pads.
• Made from lightweight aluminium.

An updated / improved version of traditional brake rotor gauge kits.

This model uses a clamping system for universal application. On late model vehicles, the clamp points are not necessarily ferrous metal, meaning that traditional magnetic clamping fixtures are no longer suitable.

Ideal for checking tyre / wheel run-out. And also measuring the brake disc / brake hub.

• Measuring range: 0-10mm
• Graduations: 0.01mm
• Aluminium clamping range: 20 - 100mm

This kit is designed to allow a DTI gauge to be mounted securely against the brake disc in order to measure disc warp. The holding bracket is designed to allow the gauge to be secured in almost any position.

The kit allows for the measurement of run-out on almost any rotating component including brake disc run out, drive flange run out, flywheel run out, valve clearance for Mitsubishi and clutch clerance for VW etc. Also suitable for use on motorcycles.

• DTI gauge resolution: 0.1mm
• Total deflection: 10mm