Accurately measure brake disc diameter without removing wheels. Quick identification of the brake system. Saves time!

• Suits most passenger / light commercial vehicles
• Range: 200 - 400mm
• Reach: 265mm

Specialised digital drum brake calipers to accurately measure drum brake wear. Suitable for vehicles with drum brakes up to 500mm in diameter.

For cars / SUVs, refer ET3565 which has a range of 0 - 300mm.

These calipers use an SR44 button battery which is not supplied with the unit. Designed for trade use only.

• 0 - 500mm
• Resolution: 0.01mm

A specialised brake wear gauge for use on heavy vehicles to check the thickness of remaining brake pad material.

An offset design allows for the blades to be inserted between the brake disc and the brake pad backing plate so that the pad thickness can be measured without the pad needing to be removed from the vehicle.

• 9 blades marked in both metric & imperial units. Range: 6 - 22mm (0.2362" - 0.8661").
• Always consult manufacturer's recommended measurements for brake pad replacement; many duty manufacturers recommend pad replacement at around 5mm.

Our best value / high powered scan tool has just gotten even better!

We've added a bluetooth VCI for more convenient scanning.

Plus action tests! Perfect for day to day workshop use!

• Quad Core processor
• 7" daylight readable LCD screen
• Full vehicle scan functionality
• All major service functions
• Action tests (NEW!!!)
• 2 years free updates

Testing brake fluid boiling point is widely regarded as the most accurate method of testing brake fluid moisture levels.

This compact unit tests DOT3 | DOT4 | DOT5 | DOT5.1.

• LCD display provides step by step instructions
• Accurate results displayed in less than sixty seconds.
• Operates on 12V supply, using vehicle's battery

A new safety blow gun from Air Boy featuring high airflow | Low noise level | Unblockable tip | Integrated chip shield.

• 600l / min @ 8 bar
• 78 db @ 6 bar
• OSHA STD 1-13.1 compliant
• Industry leading airflow for a low noise blow gun

European made quality!

Two variants - one for light solvents / other for general use.

• Trigger with filter
• Matt top cover
• ML & OZ scale
• Stable base

European made quality!

Two variants - one for light solvents / other for general use.

• Trigger with filter
• Matt top cover
• ML & OZ scale
• Stable base

A specialised adaptor kit to remove / install front and rear wheel bearings with spindles, on the vehicle. Designed to reduce the chance of damage to the hub and bearing, while saving time. Sleeves fit most standard wheel bearing sizes.

• Suitable for use with impact wrench
• Applications: Mercedes, BMW, VW, Audi, Porsche, Volvo, Toyota, Lexus, Nissan, Infiniti, Honda, Acura

A specialised kit for replacing O-ring seals on the bottom of petrol injectors in a range of BMW engines.

This kit includes a small slide hammer which screws onto the top of the injector.

• Applications: N13 | N14 | N18 | N20 | N43 | N54 | N55 | N63 | N73 | S55 | S63 | B38 | B48
• Guide cones: 7.45mm / 7.8mm
• Seating sleeves: 8.9mm (7.8mm) | 9.3mm (8.0mm) | 9.5mm (8.1mm)
• Seating tool: 9.2mm (9.05mm)
• OEM Equiv: 130280 | 130281 | 130282 | 130283 | 130190 | 130192 | 130193 | 130194