This set is designed to remove extremely stuck injectors.Suitable for use with a range of PSA, Ford, Holden, Iveco models.
SKU | ET3050 |
Barcode # | 9321280378858 |
Brand | Automotive |
12 Months
Others also bought
![Air Boy Suction Type Brake Bleeder](/assets/thumb/124143100.jpg?20200709031317)
Air Boy Suction Type Brake Bleeder
Single person operation for quickly / cleanly bleeding brakes. Uses shop air for fast brake bleeding.
- 1.2 litre cannister
- Replenishment kit available separately (124143155)
More from this category
![17T Hydraulic Injector Extractor Kit](/assets/thumb/ET3049.jpg?20200709032628)
17T Hydraulic Injector Extractor Kit
A specialised kit that assists with the extraction of very tight fitting injector nozzles, utilising a special pull spindle. Contains a 17T hydraulic ram, with 15mm stroke. Height retracted 89mm | extended 104mm.
This kit is designed to be used with a bridge, and injector pullers. These are available separately.
- M14 x 1.5 pitch Pulling Spindle 240mm long.
- M14 x 1.5 pitch Pulling Spindle 315mm long.
- M17 x 1.0 pitch Pulling Spindle 240mm long.
- M17 x 1.0 pitch Pulling Spindle 315mm long.
- M18 x 1.5 pitch Pulling Spindle 315mm long.
- M25 x 1.0 pitch Pulling Spindle 240mm long.
![BMW Diesel Injector Removal Kit](/assets/thumb/ET1748A.jpg?20200709032712)
BMW Diesel Injector Removal Kit
A specialised kit for removing BMW diesel injectors in vehicles with M47 | M57 engines, without having to remove the cylinder head.
The special extraction bridge and pull spindle allows for quick / safe injector removal.
To avoid the risk of impurities entering the combustion chamber during the cleaning process, we strongly suggest the use of a compressed air adaptor.
- Engine codes: M47TU | M57 | M57TU
- Spindle 16 (one side M17) for mounting in the injector
- 29mm socket for disassembling the electric unit
- Internal 6 Pt wrench for removing the injector needle
![BMW N55 Injector Removal Tool](/assets/thumb/ET1526B.jpg?20240409111652)
BMW N55 Injector Removal Tool
A specialised tool for late model BMW N55 petrol engines to safely / quickly install / remove the fuel injectors. For earlier N55 engines (before July 2013) please refer to ET1593A.
- Application: BMW 3.0L (2008 - 2016)
- Engine: N55 (from July 2013 onwards) - up to engine # 14407684
- OEM equiv: 130270 (13 0 270)
![Bosch / Lucas Diesel Injector Puller](/assets/thumb/ET2193A.jpg?20200709031206)
Bosch / Lucas Diesel Injector Puller
Kit consists of a slide hammer with adaptors to assist the removal of stubborn Bosch and Lucas diesel injectors.
- Adaptors: M8 P0.75 (male) | M12 P1.5 (Bosch) | M14 x P 1.5 (Volvo / Scania)
- Slide hammer thread: M12 | 175mm length (without adaptors).
![Bosch Injector Removal Kit](/assets/thumb/ET4059.jpg?20200709031659)
Bosch Injector Removal Kit
Specialised kit for demounting stuck injectors (mainly Bosch) without removing the cylinder head. Wide coverage on 1.3L - 2.2L diesel engines.
![Chrysler Injector Puller | 2.5L | 2.7L](/assets/thumb/ET1437.jpg?20200709033028)
Chrysler Injector Puller | 2.5L | 2.7L
This specialised injector puller is designed to safely extract tightly stuck injectors on Chrysler 2.5L | 2.7L CRD 16 valve VM engines.