A professional quality reversible 3/8" air drill, supplied with a keyless chuck. Forward and reverse lever beside the trigger. Exhaust through the base of the handle.

• Reversible
• Keyless chuck
• Professional quality
• Free speed: 1,800 RPM
• Chuck size: 3/8"
• Avg air cons: 4 CFM

This true RMS clamp meter provides accurate AC, AC/DC Current and Voltage readings regardless of waveforms. This meter can be used in most industrial and commercial applications where non-linear loads distort the Current or Voltage waveform.

• 30mm clamp opening
• 1000A current AC / DC
• 600V voltage AC / DC
• 4000 Digital display counts
• CAT III 600V rating

Replacement battery cable clamp for the ET2709 code reader / battery tester.

An advanced CANbus circuit tester compatible with both 12V and 24V systems.

Provides a live display of present communicating signals, and can display the voltage of each pin without having to use a multimeter.

Essential for checking ground / voltage on all OBDII pins prior to connecting a scan tool / flashing ECU. If your scan tool cannot communicate, it could simply be a fault with the OBD connector.

• Connect inline with scan tools, Or use with a multimeter / oscilloscope.
• Quickly diagnose CAN faults.
• Monitor battery voltage at the OBD port.
• A great way to log pin voltage data when used with our ET2504 multimeter.

• 14 Pin Benz connector

• 20 Pin Isuzu connector

• 3 Pin Isuzu connector

• 30 Pin Iveco connector