Test battery charge / health for all 12V auto batteries and alternator / crank systems for 12V / 24V batteries, including new stop start batteries.

Print test results using the built in printer.

• Tests all main battery standards
• Max load voltage tests for 12V / 24V
• Short circuit / reverse polarity protection

A professional quality automotive battery tester for testing both 12V lithium ion and lead acid batteries. This tester uses conductance technology; a passive testing methodology which does not discharge / drain the battery. This analyser also checks the alternator's charging and starter's cranking condition.

• Tests all 12V lithium ion / lead acid batteries for cars / motor cycles.
• Print function via PC printer
• Testing range: Lithium ion 20- 1000CCA | Lead acid 20 - 2000CCA

This new addition to our Foxwell range combines an OBDII code reader, with a 12V battery tester in one convenient tool.

The OBDII code reader is compatible with all OBDII compliant vehicles, and reads / clears engine codes and turns off the Check Engine light. Plus the code reader has a built in trouble code database, and offers Automatic VIN recognition.

The 12V battery tester analyses the state of health on all common automotive batteries including AGM / Flooded / Gel batteries. Test reports can be printed via a PC.

• 100 - 1,100CCA battery range
• Lifetime free updates

An advanced CANbus circuit tester compatible with both 12V and 24V systems.

Provides a live display of present communicating signals, and can display the voltage of each pin without having to use a multimeter.

Essential for checking ground / voltage on all OBDII pins prior to connecting a scan tool / flashing ECU. If your scan tool cannot communicate, it could simply be a fault with the OBD connector.

• Connect inline with scan tools, Or use with a multimeter / oscilloscope.
• Quickly diagnose CAN faults.
• Monitor battery voltage at the OBD port.
• A great way to log pin voltage data when used with our ET2504 multimeter.

Replacement battery cable clamp for the ET2709 code reader / battery tester.

An advanced CANbus circuit tester compatible with both 12V and 24V systems.

Provides a live display of present communicating signals, and can display the voltage of each pin without having to use a multimeter.

Essential for checking ground / voltage on all OBDII pins prior to connecting a scan tool / flashing ECU. If your scan tool cannot communicate, it could simply be a fault with the OBD connector.

• Connect inline with scan tools, Or use with a multimeter / oscilloscope.
• Quickly diagnose CAN faults.
• Monitor battery voltage at the OBD port.
• A great way to log pin voltage data when used with our ET2504 multimeter.

• 14 Pin Benz connector

• 3 Pin Isuzu connector

• 30 Pin Iveco connector