Professional 600A AC, AC/DC True RMS Clamp Meter with Inrush current. These clamp meters provide fast A/D converting sampling time, high accuracy and all key features for measurement. Features a modern body and jaws design for perfect handhold and tight place testing. A clear backlit display is easy to see and a handy data hold keeps measurements on the display.
- 34mm jaw opening
- 600A current AC / DC
- 1000V voltage AC / DC
- 100ms inrush current
- Non contact voltage function
| SKU | ET2605 |
| Barcode # | 9321280411104 |
| Brand | Automotive |
12 Months
Others also bought
Digital LED Circuit Tester Kit
Packaged in a BMC, this circuit tester has a standard 4mm connector which can be used with standard multimeter probes.
Wire piercer / probes / alligator clip included.
- Not for use with airbags / vehicle computers.
- For use with DC voltage only.
AC / DC 1000A True RMS Clamp Meter
This true RMS clamp meter provides accurate AC, AC/DC Current and Voltage readings regardless of waveforms. This meter can be used in most industrial and commercial applications where non-linear loads distort the Current or Voltage waveform.
- 30mm clamp opening
- 1000A current AC / DC
- 600V voltage AC / DC
- 4000 Digital display counts
- CAT III 600V rating
Bluetooth Clamp Meter | Oscilloscope
Connect up to three clamp meters to the one Bluetooth app! Ideal for diagnosing 3 phase EV motors!
Multimeter and oscilloscope functions. Feasures a rechargeable battery | 2.8" LCD | 38mm opening/
- 1,000V AC / DC
- 1,000A AC / DC
- Resistance / Capacitance / Frequency / Duty cycle
- 1 channel oscilloscope (1kHz / 5.0MSa/S sampling rate)
More from this category
AC / DC 1000A True RMS Clamp Meter
This true RMS clamp meter provides accurate AC, AC/DC Current and Voltage readings regardless of waveforms. This meter can be used in most industrial and commercial applications where non-linear loads distort the Current or Voltage waveform.
- 30mm clamp opening
- 1000A current AC / DC
- 600V voltage AC / DC
- 4000 Digital display counts
- CAT III 600V rating
AC / DC Current Sensor Clamp
This current sensor clamp is designed to test current and leakage of circuits below 600V. A practical unit with compact size, high accuracy and good stability. Supplied with BNC connectors.
- 25mm x 30mm clamp size.
- 0 - 1,000A AC / DC range.
- BNC plugs output interface
- 2m output wire length
- IEC1010-1 | Cat III (600V)
Bluetooth Clamp Meter | Oscilloscope
Connect up to three clamp meters to the one Bluetooth app! Ideal for diagnosing 3 phase EV motors!
Multimeter and oscilloscope functions. Feasures a rechargeable battery | 2.8" LCD | 38mm opening/
- 1,000V AC / DC
- 1,000A AC / DC
- Resistance / Capacitance / Frequency / Duty cycle
- 1 channel oscilloscope (1kHz / 5.0MSa/S sampling rate)
Power Probe Digital Clamp Meter
The Power Probe Digital Clamp Meter is an 80 Amp, auto-ranging clamp meter designed specifically for the automotive technician. This meter is rated CAT III 600V and can measure Volts, Amps, Ohms, Frequency and Temperature, necessary for automotive electrical testing. This meter's diagnostic applications include (but are not limited to) Parasitic Draw, Crank Current testing and HVAC Temperature testing.
Supplied with 3x AAA batteries.
- Voltage: AC 600V | DC 600V
- Current: AC 80A | DC 80A
- Display 4000 counts
- Jaw Opening 24mm/0.9"
- Auto & Manual Ranging
- Auto Power Off / Non-Contact Voltage Detector
- Diode Open Voltage 3.2V
- Continuity Buzzer <50
- Data Hold
- Large LCD Display Backlight
- Work Light
- Low Battery Display