Threaded collar suits Honda / Hyundai / Kia / Nissan vehicles.

Transparent lower chamber. Funnel can be directly connected to oil filler neck

• Funnel thread: M33 x P3.5
• Please note that this funnel does not suit the Nissan Navara YS23DDTT engine

This tool is used to check for proper pin-fit and tension on US, European and Asian automotive electrical female terminals. This tool covers Japanese and Korean built vehicles including, Toyota, Honda, Mitsubishi, Mazda, Nissan, Subaru, Suzuki, Isuzu, Kia and Hyundai vehicles. This tool also covers US joint venture vehicles including Ford / Mazda, GM / Toyota, Ford / Nissan, and GM / Suzuki.

The tool is precision manufactured in the US. The tool has looped wires that are colour coded and the colour code chart is located on the packaging. The tool meets all RoHS requirements for all of the components and the finished product.

A must-have tool to properly diagnose electrical and electronic concerns on all common makes and models.

• Colour coded
• Made in USA
• Check socket fit condition

Adjustable jaws make this fuel tank locking ring remover applicable to a range of vehicles. Simply loosen the lock nuts on the tool, and adjust so that the slots fits over the teeth in the plastic ring on the fuel tank.

• Adjustable 56 - 189mm range
• Civic | Corolla + many other models
• Use with 3/8" wrench

Used to remove the fuel level sensor lock ring on BMW & BMW Mini models from 1998 - 2011. This is necessary in order to access the fuel filter.

• Chassis codes: BMW E31, E34, E36, E38, E39, E46, E53, E60, E63, E64, E65, E70, E83, E85, E90, BMW Mini: R50, R52, R53, R55, R56, R57.
• 1/2" Sq Drv

A specialised tool for removing / installing the metal fuel tank lid on selected BMW vehicles with N63 engine, and the chassis listed below.

• Applications: BMW F01 | F02 |X3 chassis, with N63 engines.
• See instruction sheet for detailed vehicle fitment.
• OEM Equiv: 161190

A specialised tool to assist with removing / installing the fuel tank lid when servicing the fuel tank. This tool is applicable to a range of European vehicles including certain BMW, Mercedes models.

• 145mm OD
• Applications: BMW (E36 | E46), Mercedes (W203 | W211), Audi, Ford

This 3 leg tool is designed for removing / installing fuel tank sender moulding rings.

• 75 - 160mm range
• Use with a 24mm socket / wrench

A specialised fuel tank sender locking ring tool for Holden vehicles, as well as some SAAB vehicles.

Approximately 140mm high (from the base for the two angled arms to the top). Each arm approximately 75mm long.

• Astra-G (98-12) | Astra-H (04-12) & SAAB 9-3 (03-11)
• B207 | B284L | Z19DT | Z19DTH | Z19DTR
• 1/2" Sq Drv
• OEM Equiv: KM-797