This Foxwell adaptor cable is designed for use with the ET2530 and ET6642 scan tool with ET8000 series adaptors.

• Male - Male
• 15 Pin

This new addition to our Foxwell range combines an OBDII code reader, with a 12V battery tester in one convenient tool.

The OBDII code reader is compatible with all OBDII compliant vehicles, and reads / clears engine codes and turns off the Check Engine light. Plus the code reader has a built in trouble code database, and offers Automatic VIN recognition.

The 12V battery tester analyses the state of health on all common automotive batteries including AGM / Flooded / Gel batteries. Test reports can be printed via a PC.

• 100 - 1,100CCA battery range
• Lifetime free updates

A manual type vacuum pump for extracting engine oil (and ATF / coolant) etc. Includes a 5.6mm OD suction probe which fits most dipstick tubes.

This kit is NOT suitable for extracting petrol / diesel fluids, as the sealants used in this kit are not fuel / solvent resistant.

• 6 litre tank capacity
• Plastic base to step on to stabilise the tank while pumping
• Conical pour spout for spill free waste oil discharge

Our best value / high powered scan tool has just gotten even better!

We've added a bluetooth VCI for more convenient scanning.

Plus action tests! Perfect for day to day workshop use!

• Quad Core processor
• 7" daylight readable LCD screen
• Full vehicle scan functionality
• All major service functions
• Action tests (NEW!!!)
• 2 years free updates

Test battery charge / health for all 12V auto batteries and alternator / crank systems for 12V / 24V batteries, including new stop start batteries.

Print test results using the built in printer.

• Tests all main battery standards
• Max load voltage tests for 12V / 24V
• Short circuit / reverse polarity protection

Single handed brake bleeding. Powered by the vehicle's own battery. No shop air required!

• Bleed pressure is closely controlled up to 3.0 bar - suitable for most vehicles (even those with ABS). Meets European OEM pressure requirements.
• Auto shut off function when pressure falls below 0.5 bar.

A professional quality automotive battery tester for testing both 12V lithium ion and lead acid batteries. This tester uses conductance technology; a passive testing methodology which does not discharge / drain the battery. This analyser also checks the alternator's charging and starter's cranking condition.

• Tests all 12V lithium ion / lead acid batteries for cars / motor cycles.
• Print function via PC printer
• Testing range: Lithium ion 20- 1000CCA | Lead acid 20 - 2000CCA

This petrol engine timing light is designed for professional use. Featuring multiple measurement modes and a rotating barrel for better aim at the timing market and LCD viewing angle.

• Tachometer: 249 to 9,990 RPM (± 1% Accuracy)
• Dwell: 0¡ to 180¡ / 2 - 12 cylinders (±1% Accuracy)
• Voltage: 10 - 16V DC (± 1% Accuracy)
• Advance Degrees (2 / 4 cycle DIS & Conventional): 0¡ to 90¡ ( ± 0.5¡ Accuracy)

DC powered timing light for use on 12V petrol engines. High intensity prefocused flashes clearly pick up engine timing mark.

• Double check indicator tests for incorrect hook up or faulty Xenon tube
• Universal spark plug adaptor installs in seconds
• Replaceable Xenon flash tube

This true RMS clamp meter provides accurate AC, AC/DC Current and Voltage readings regardless of waveforms. This meter can be used in most industrial and commercial applications where non-linear loads distort the Current or Voltage waveform.

• 30mm clamp opening
• 1000A current AC / DC
• 600V voltage AC / DC
• 4000 Digital display counts
• CAT III 600V rating