A professional quality tester designed for late model vehicles fitted with 13 pin Euro type sockets fitted to the back of the vehicle.

This tester is designed for testing the vehicle side socket, not the trailer itself.

• Tests socket functionality on modern 13 pin Euro sockets. Can also test legacy 7 pin sockets (separate adaptor).
• CANbus compatible to also test 12V continuous / ignition live feeds and the reversing lights. Useful when diagnosing faults.
• Built in self test function on the tool.
• Supplied with 4m cable to allow the unit to be used while sitting in the vehicle.
• Powered by vehicle 12V power supply.

Comprehensive kit for quickly & securely connecting into wiring.

• 2 way LED testers Black / red multimeter connector leads
• Male / female round terminal to banana plug
• Male / female flat blade terminal to banana plug
• Variable resistors with banana terminals
• Needle / piercing probes
• Heavy duty alligator clips

This petrol engine timing light is designed for professional use. Featuring multiple measurement modes and a rotating barrel for better aim at the timing market and LCD viewing angle.

• Tachometer: 249 to 9,990 RPM (± 1% Accuracy)
• Dwell: 0¡ to 180¡ / 2 - 12 cylinders (±1% Accuracy)
• Voltage: 10 - 16V DC (± 1% Accuracy)
• Advance Degrees (2 / 4 cycle DIS & Conventional): 0¡ to 90¡ ( ± 0.5¡ Accuracy)

An incredibly handy set of wheel nut sockets. These flip sockets include new half size sockets for chrome covered nuts which have become swollen / warped.

Inflated / warped chrome plated caps are a common problem, especially on some Ford vehicles. Standard sized wheel nut sockets will not fit, and a half sized variant is required.

• Sizes: 17 x 19mm | 17.5mm | 18.5 x 19.5mm | 21 x 21.5mm | 22 x 22.5mm
• 1/2" Sq Drv extension (75mm long)

An advanced CANbus circuit tester compatible with both 12V and 24V systems.

Provides a live display of present communicating signals, and can display the voltage of each pin without having to use a multimeter.

Essential for checking ground / voltage on all OBDII pins prior to connecting a scan tool / flashing ECU. If your scan tool cannot communicate, it could simply be a fault with the OBD connector.

• Connect inline with scan tools, Or use with a multimeter / oscilloscope.
• Quickly diagnose CAN faults.
• Monitor battery voltage at the OBD port.
• A great way to log pin voltage data when used with our ET2504 multimeter.

Threaded collar suits Honda / Hyundai / Kia / Nissan vehicles.

Transparent lower chamber. Funnel can be directly connected to oil filler neck

• Funnel thread: M33 x P3.5
• Please note that this funnel does not suit the Nissan Navara YS23DDTT engine

A specialised fuel filter wrench for Isuzu FR series trucks.

• 118.7mm diameter
• 8 Flutes
• 1/2" Sq Drv
• OEM filter: 8-98092482-1

Professional quality multimeter with oscilloscope functions

Fast A/D converting sampling time, built in data logging, and trend capture.

Bluetooth enabled, with App.

IP67 rated.

• 20MHz / 50MS/s bandwidth / real time sampling rate
• 320 x 240 px TFT colour LCD display
• CATIII 1000V / CATIV 600V
• Rechargeable battery