A specialised automotive socket set containing hard to find female Ribe, female Pentagon, and security Spliine sockets.
These sockets are used on a wide range of vehicles, especially Nissan / Renault and VAG group vehicles.
Packaged on a handy socket rail.
- Female Pentagon sockets: 10 | 12 | 14 | 19mm
- Pentagon male bit socket: 10mm
- Spline (security): M16S (60mm) | M18S (75mm)
- 10pt profile: 20mm
- Female Ribe sockets: M6S | M8S | M10S | M12S (M8S also drives Torx Plus T55)
Honda Lower Control Arm Socket | 20mm | 10 Pt
A specialised 10 point socket for servicing lower control arm bolts on Honda Civic / CRV / Acura RSX since 2001. Removes / installs retaining bolts on rear trailing arms.
- 20mm dia (16.2mm across the flutes)
- 1/2" Sq Drv
- Length: 38mm
- Impact grade
Female Ribe Socket | M8
This socket is suitable for various engine repairs on Nissan vehicles.
- M8 female Ribe
- 1/2" Sq Drv
- 38mm OL
Female Ribe Socket | M6
This socket is suitable for various engine repairs on Nissan vehicles. Also suits Volvo S40 variable pulley.
- M6 female Ribe
- 1/2" Sq Drv
- 38mm overall length
Female Ribe Socket | M10S
This M10S female ribe socket has a wide variety of automotive applications, including removing the retaining screw on Toyota idler pulley belt, in order to be able to adjust the idler belt.
On Toyota (most) 1ZZFE / (all) 2ZZGE engines, this socket fits the bolt that secures the pulley to the belt tensioner. If your pulley has an exposed bolt this is the right tool. If your 1ZZ pulley has a black plastic cap covering the bolt head then it is more likely to be a standard Torx bolt.
- Applications: Toyota 1.8L 1ZZFE (98-08) / 2ZZGE / 2AZ-FE / 2AR-FE / 1AR-FE / 2GR-FE
- M10 female ribe socket
- 1/2" Sq Drv
Female Ribe Socket | M12S
This female ribe socket is used for adjusting the M12S bolt on the idler belt on Nissan vehicles. This socket is also suitable for any other applications requiring a 16mm ribe socket.
- M12S Ribe impact socket (to suit 16mm ribe bolts)
- 38mm length
- 1/2" Sq Drv
3 Point Impact Socket | 8TS
Three point impact socket for general repairs on Nissan vehicles, especially the transmission pump and balance shaft fixings.
- Size: 8TS
- Length: 38mm
- Drive: 1/2" Sq Drive
- Chrome Moly
Pentagon Socket | 14mm
Specially designed female socket for pentagon rear brake calipers on the Mercedes Smart car as well as Holden Astra G & Zafira.
- 14mm dia
- Pentagon female socket
- 1/2" Sq Drv
Pentagon Socket | 19mm
A special female Pentagon socket for use with Bendix brakes, and parking brakes on Citroen | Peugeot | Renault.
- 19mm dia
- Pentagon female socket
- 1/2" Sq Drv
Pentagon Bit Socket | 10mm | Male
A 10mm male Pentagon bit socket for Girling brake systems.
- 10mm male Pentagon bit socket
- 1/2" Sq Drv
Spline (Sec) Bit Socket | M16S
Specialty socket which is slightly undersized to avoid damage when removing sump plugs / gear boxes on selected VAG vehicles.
- Type: Spline (Sec)
- Size: M16
- Length: 60mm
- Drive: 1/2" Sq Drv
Spline (Sec) Bit Socket | M18S
A specialised Spline (Sec) socket for working on rear hubs on VW Golf | Jetta and other Mark IV chassis vehicles.
- M18 Spline (Sec)
- 78mm overall length
- 1/2" Sq Drv
Pentagon Socket | 10mm | Female
A professional quality pentagon impact socket. This size is commonly used on Nissan brake and fuel pump fixings. Part of the Endeavour Tools range of specialised sockets.
- 10mm diameter
- Female pentagon socket
- 1/2" Sq Dr
Honda Lower Control Arm Socket | 20mm | 10 Pt
A specialised 10 point socket for servicing lower control arm bolts on Honda Civic / CRV / Acura RSX since 2001. Removes / installs retaining bolts on rear trailing arms.
- 20mm dia (16.2mm across the flutes)
- 1/2" Sq Drv
- Length: 38mm
- Impact grade
Female Ribe Socket | M8
This socket is suitable for various engine repairs on Nissan vehicles.
- M8 female Ribe
- 1/2" Sq Drv
- 38mm OL
Female Ribe Socket | M6
This socket is suitable for various engine repairs on Nissan vehicles. Also suits Volvo S40 variable pulley.
- M6 female Ribe
- 1/2" Sq Drv
- 38mm overall length
Female Ribe Socket | M10S
This M10S female ribe socket has a wide variety of automotive applications, including removing the retaining screw on Toyota idler pulley belt, in order to be able to adjust the idler belt.
On Toyota (most) 1ZZFE / (all) 2ZZGE engines, this socket fits the bolt that secures the pulley to the belt tensioner. If your pulley has an exposed bolt this is the right tool. If your 1ZZ pulley has a black plastic cap covering the bolt head then it is more likely to be a standard Torx bolt.
- Applications: Toyota 1.8L 1ZZFE (98-08) / 2ZZGE / 2AZ-FE / 2AR-FE / 1AR-FE / 2GR-FE
- M10 female ribe socket
- 1/2" Sq Drv
Female Ribe Socket | M12S
This female ribe socket is used for adjusting the M12S bolt on the idler belt on Nissan vehicles. This socket is also suitable for any other applications requiring a 16mm ribe socket.
- M12S Ribe impact socket (to suit 16mm ribe bolts)
- 38mm length
- 1/2" Sq Drv
3 Point Impact Socket | 8TS
Three point impact socket for general repairs on Nissan vehicles, especially the transmission pump and balance shaft fixings.
- Size: 8TS
- Length: 38mm
- Drive: 1/2" Sq Drive
- Chrome Moly
Pentagon Socket | 14mm
Specially designed female socket for pentagon rear brake calipers on the Mercedes Smart car as well as Holden Astra G & Zafira.
- 14mm dia
- Pentagon female socket
- 1/2" Sq Drv
Pentagon Socket | 19mm
A special female Pentagon socket for use with Bendix brakes, and parking brakes on Citroen | Peugeot | Renault.
- 19mm dia
- Pentagon female socket
- 1/2" Sq Drv
Pentagon Bit Socket | 10mm | Male
A 10mm male Pentagon bit socket for Girling brake systems.
- 10mm male Pentagon bit socket
- 1/2" Sq Drv
Spline (Sec) Bit Socket | M16S
Specialty socket which is slightly undersized to avoid damage when removing sump plugs / gear boxes on selected VAG vehicles.
- Type: Spline (Sec)
- Size: M16
- Length: 60mm
- Drive: 1/2" Sq Drv
Spline (Sec) Bit Socket | M18S
A specialised Spline (Sec) socket for working on rear hubs on VW Golf | Jetta and other Mark IV chassis vehicles.
- M18 Spline (Sec)
- 78mm overall length
- 1/2" Sq Drv
Pentagon Socket | 10mm | Female
A professional quality pentagon impact socket. This size is commonly used on Nissan brake and fuel pump fixings. Part of the Endeavour Tools range of specialised sockets.
- 10mm diameter
- Female pentagon socket
- 1/2" Sq Dr
SKU | ET2465 |
Barcode # | 9321280336407 |
Brand | Automotive |
Product weight | 1.1800kg |
Shipping weight | 1.180000kg |
Vehicle Make | Nissan |
Vehicle Make | Renault |
Vehicle Make | VAG |
12 Months
Calculate Shipping
Flat Rate Shipping - $16.50
$16.50 flat rate shipping
Manual handling charge for long packaged products - $35.00
Manual handling charge for long packaged products
Others also bought
VW Spline Style Locking Wheel Nut Socket Set
A spline style locking wheel nut key set for VW vehicles. These spline style keys are suitable for pre 2010 locking wheel nuts.
- 23 pieces
- OEM: T10101A, T40004
VW Locking Wheel Nut Socket Set
A specialised master kit of pattern style wheel nut sockets. These are commonly used on late model VW vehicles. Socket sizes are labelled to correspond with OEM sizing. From #521 - #540. A similar kit is available with spline style sockets for older VW vehicles.
Do not use with an impact wrench.
- 20 Pce kit
- Pattern style
- OEM Equiv: T10313
Torx Plus Bit Socket Set (13 Pce)
A specialised set of Torx Plus bit sockets / impact sockets. Torx Plus fasteners are widely used in the automotive sector, and have a six lobe design, but with a different geometry than standard Torx sockets.
This kit contains 13 sockets from size TP10 - TP80, including TP50 / TP55 which are used with late model Subaru engines.
- 3/8" Sq Drv: TP10 | TP15 | TP20 | TP25 | TP27 | TP30 | TP40 | TP45 | TP50 | TP55, 1/2" Sq Drv: TP60 | TP70 | TP80
- 48mm overall length
Spline Impact Socket Set | M4 - M18 | 1/2" Sq
- M4 | M5 | M6 | M8 | M10 | M12 | M14 | M16 | M18
- 190mm Universal extension (1/2" Sq Drv)
More from this category
Cylinder Head Bolt Kit
A specialised set of long reach sockets covering a wide range of cylinder head bolts .
- Spline: M14 x 100mm | M12 x140mm | M10 x 140mm
- Ribe: M12 x 100mm | M10 VW Form x 140mm
- Hex: M10 x 140mm
- Torx©: T60 x 140mm
- E-Torx©: E12 x 140mm