A specialised set of Torx Plus bit sockets / impact sockets. Torx Plus fasteners are widely used in the automotive sector, and have a six lobe design, but with a different geometry than standard Torx sockets.
This kit contains 13 sockets from size TP10 - TP80, including TP50 / TP55 which are used with late model Subaru engines.
- 3/8" Sq Drv: TP10 | TP15 | TP20 | TP25 | TP27 | TP30 | TP40 | TP45 | TP50, 1/2" Sq Drv: TP55 | TP60 | TP70 | TP80
- 48mm overall length
Torx Plus Socket | TP60
- T60 Torx Plus socket
- 1/2" Sq Drv
- 40mm overall length
- Impact grade
Torx Plus Socket | TP70
- T70 Torx Plus socket
- 1/2" Sq Drv
- 40mm overall length
- Impact grade
Torx Plus Socket | TP80
- T80 Torx Plus socket
- 1/2" Sq Drv
- 40mm overall length
- Impact grade
Torx Plus Bit Socket | TP10
- T10 Torx Plus bit socket
- 3/8" Sq Drv
- 48mm overall length
- Impact grade
Torx Plus Bit Socket | TP15
- T15 Torx Plus socket
- 3/8" Sq Drv
- 48mm overall length
- Impact grade
Torx Plus Bit Socket | TP20
- T20 Torx Plus socket
- 3/8" Sq Drv
- 48mm overall length
- Impact grade
Torx Plus Bit Socket | TP25
- T25 Torx Plus socket
- 3/8" Sq Drv
- 48mm overall length
- Impact grade
Torx Plus Bit Socket | TP27
- T27 Torx Plus socket
- 3/8" Sq Drv
- 48mm overall length
- Impact grade
Torx Plus Bit Socket | TP30
- T30 Torx Plus socket
- 3/8" Sq Drv
- 48mm overall length
- Impact grade
Torx Plus Bit Socket | TP40
A specialised Torx Plus 6 point socket. This socket is commonly used to remove / install ATI Harmonic Balancer bolts. Also, if you have an RCD BAE type gear drive, the TP40 socket can be used to remove the idler gear plate to service the gear drive.
- T40 Torx Plus socket
- 3/8" Sq Drv
- 48mm overall length
- Impact grade
Torx Plus Bit Socket | TP45
- T45 Torx Plus socket
- 3/8" Sq Drv
- 48mm overall length
- Impact grade
Torx Plus Bit Socket | TP50
- T50 Torx Plus socket
- 3/8" Sq Drv
- 48mm overall length
- Impact grade
Torx Plus Bit Socket | TP55
Torx Plus¨ drivers have a special six sided geometry, and will not fit standard Torx¨ fasteners. Standard Torx¨ drivers can drive Torx Plus¨ fasteners, but because of the loose fit may damage the fastener, and are not recommended.
- T55 Torx Plus bit socket
- 1/2" Sq Drv
- 55mm overall length
- Impact grade
Torx Plus Socket | TP60
- T60 Torx Plus socket
- 1/2" Sq Drv
- 40mm overall length
- Impact grade
Torx Plus Socket | TP70
- T70 Torx Plus socket
- 1/2" Sq Drv
- 40mm overall length
- Impact grade
Torx Plus Socket | TP80
- T80 Torx Plus socket
- 1/2" Sq Drv
- 40mm overall length
- Impact grade
Torx Plus Bit Socket | TP10
- T10 Torx Plus bit socket
- 3/8" Sq Drv
- 48mm overall length
- Impact grade
Torx Plus Bit Socket | TP15
- T15 Torx Plus socket
- 3/8" Sq Drv
- 48mm overall length
- Impact grade
Torx Plus Bit Socket | TP20
- T20 Torx Plus socket
- 3/8" Sq Drv
- 48mm overall length
- Impact grade
Torx Plus Bit Socket | TP25
- T25 Torx Plus socket
- 3/8" Sq Drv
- 48mm overall length
- Impact grade
Torx Plus Bit Socket | TP27
- T27 Torx Plus socket
- 3/8" Sq Drv
- 48mm overall length
- Impact grade
Torx Plus Bit Socket | TP30
- T30 Torx Plus socket
- 3/8" Sq Drv
- 48mm overall length
- Impact grade
Torx Plus Bit Socket | TP40
A specialised Torx Plus 6 point socket. This socket is commonly used to remove / install ATI Harmonic Balancer bolts. Also, if you have an RCD BAE type gear drive, the TP40 socket can be used to remove the idler gear plate to service the gear drive.
- T40 Torx Plus socket
- 3/8" Sq Drv
- 48mm overall length
- Impact grade
Torx Plus Bit Socket | TP45
- T45 Torx Plus socket
- 3/8" Sq Drv
- 48mm overall length
- Impact grade
Torx Plus Bit Socket | TP50
- T50 Torx Plus socket
- 3/8" Sq Drv
- 48mm overall length
- Impact grade
Torx Plus Bit Socket | TP55
Torx Plus¨ drivers have a special six sided geometry, and will not fit standard Torx¨ fasteners. Standard Torx¨ drivers can drive Torx Plus¨ fasteners, but because of the loose fit may damage the fastener, and are not recommended.
- T55 Torx Plus bit socket
- 1/2" Sq Drv
- 55mm overall length
- Impact grade
| SKU | ET2037 |
| Barcode # | 9321280344150 |
| Brand | Endeavour |
| Product weight | 0.7900kg |
| Shipping weight | 0.790000kg |
12 Months
Calculate Shipping
Flat Rate Shipping - $16.50
$16.50 flat rate shipping
Manual handling charge for long packaged products - $35.00
Manual handling charge for long packaged products
Others also bought
Axle Nut Impact Socket Set | Deep | 12Pt
- 12 Point
- Deep
- 1/2" Sq Drv
- Sizes: 29, 30, 32, 34, 35, 36, 38, 39mm
Ajax Air Riveter
- Nose Pieces: 1/8" | 5/32" | 3/16" | 1/4"
- Traction Power: 1,700kg
- Stroke length: 14mm
Sonsbeek Truck Tyre Inflator
The Sonsbeek truck tyre inflator is designed to reliably inflate truck tyres up to 220 PSI. The inflator has a large 90mm dial gauge for easy reading. The unit is designed for inflation, deflation and measurement.
The inflator is designed for rugged applications, and is supplied with a rubber impact protector on the gauge, rubber grip on the chuck, and a pressed steel lever.
One button operation
- 90mm dial for easy reading
- 220 PSI scale
- 1m hose length
- Rubber gauge protector
Torx Plus Impact Socket | T50 | 78mm
A high quality single piece / impact grade Torx Plus socket (not to be confused with a standard Torx T50!). Used primarily for Subaru / Nissan dual mass flywheel.
- T50IP Torx Plus
- 78mm overall length
- 1/2" Sq Drv
- Chrome Moly construction
More from this category
Tesla Torx Plus 10 EPR Socket (5 Sided)
A specialised Torx Plus profile - five sided - female socket. This #10 EPR / E10 5 lobe socket is commonly used for removing electrical connectors on the Tesla 3, and front bumper / number plate fixings on the Tesla S.
- Size: 10EPR
- 1/2" Sq Drv
- OE equiv: 1059330-00-B
Torx Plus Impact Socket | T50 | 78mm
A high quality single piece / impact grade Torx Plus socket (not to be confused with a standard Torx T50!). Used primarily for Subaru / Nissan dual mass flywheel.
- T50IP Torx Plus
- 78mm overall length
- 1/2" Sq Drv
- Chrome Moly construction
Torx Plus Impact Socket | T55 | 78mm
A high quality single piece / impact grade Torx Plus socket. Used primarily for Suburu bell housing. And also Navara D23 / D40 flywheel bolts, and Ford F Series seat bolts.
- T55 Torx Plus
- 78mm overall length
- 1/2" Sq Drv
- Chrome Moly construction