A heavy duty diesel injector puller kit for disassembling / removing stuck injectors.

This kit has broad application including Bosch / Delphi injectors.

Includes universal joint to provide better access to hard to reach areas, and an M18 >> 5/8-18 UNF adaptor (to use with standard slide hammers).

• Hex bit sockets: ¿7.6, ¿6.6
• Universal joint: M18 x 1.5
• Special hex sockets: 25mm, 27mm, 29mm, 30mm
• Injector grippers: 12mm, 13.5mm, 16mm, 26mm
• Pull spindles: OT-M14 x 1.5, OT-M16 x 1.5, IT-M16 x 1.0, ITM17x 1.0, IT-M20 x 1.0, IT-M25 x 1.0, IT-M27 x 1.0, OT-M25 x 0.5,OT-M25 x 0.75, OT-M27 x 1

A specialised kit that assists with the extraction of very tight fitting injector nozzles, utilising a special pull spindle. Contains a 17T hydraulic ram, with 15mm stroke. Height retracted 89mm | extended 104mm.

This kit is designed to be used with a bridge, and injector pullers. These are available separately.

• M14 x 1.5 pitch Pulling Spindle 240mm long.
• M14 x 1.5 pitch Pulling Spindle 315mm long.
• M17 x 1.0 pitch Pulling Spindle 240mm long.
• M17 x 1.0 pitch Pulling Spindle 315mm long.
• M18 x 1.5 pitch Pulling Spindle 315mm long.
• M25 x 1.0 pitch Pulling Spindle 240mm long.

A specialised kit for removing BMW diesel injectors in vehicles with M47 | M57 engines, without having to remove the cylinder head.

The special extraction bridge and pull spindle allows for quick / safe injector removal.

To avoid the risk of impurities entering the combustion chamber during the cleaning process, we strongly suggest the use of a compressed air adaptor.

• Engine codes: M47TU | M57 | M57TU
• Spindle 16 (one side M17) for mounting in the injector
• 29mm socket for disassembling the electric unit
• Internal 6 Pt wrench for removing the injector needle

A specialised tool for late model BMW N55 petrol engines to safely / quickly install / remove the fuel injectors. For earlier N55 engines (before July 2013) please refer to ET1593A.

• Application: BMW 3.0L (2008 - 2016)
• Engine: N55 (from July 2013 onwards) - up to engine # 14407684
• OEM equiv: 130270 (13 0 270)

Kit consists of a slide hammer with adaptors to assist the removal of stubborn Bosch and Lucas diesel injectors.

• Adaptors: M8 P0.75 (male) | M12 P1.5 (Bosch) | M14 x P 1.5 (Volvo / Scania)
• Slide hammer thread: M12 | 175mm length (without adaptors).

Specialised kit for demounting stuck injectors (mainly Bosch) without removing the cylinder head. Wide coverage on 1.3L - 2.2L diesel engines.

This specialised injector puller is designed to safely extract tightly stuck injectors on Chrysler 2.5L | 2.7L CRD 16 valve VM engines.