This slide hammer adaptor converts from M18 thread to a 5/8-18 UNF thread which is commonly used on slide hammers.
- Supplied with the ET1905 kit which uses an M18 thread.
SKU | ET1905A |
Barcode # | 9321280370180 |
Brand | Automotive |
Product weight | 0.1350kg |
Shipping weight | 0.135000kg |
12 Months
You may also like
![Diesel Injector Removal Kit](/assets/thumb/ET1905.jpg?20200709032950)
Diesel Injector Removal Kit
A heavy duty diesel injector puller kit for disassembling / removing stuck injectors.
This kit has broad application including Bosch / Delphi injectors.
Includes universal joint to provide better access to hard to reach areas, and an M18 >> 5/8-18 UNF adaptor (to use with standard slide hammers).
- Hex bit sockets: ¿7.6, ¿6.6
- Universal joint: M18 x 1.5
- Special hex sockets: 25mm, 27mm, 29mm, 30mm
- Injector grippers: 12mm, 13.5mm, 16mm, 26mm
- Pull spindles: OT-M14 x 1.5, OT-M16 x 1.5, IT-M16 x 1.0, ITM17x 1.0, IT-M20 x 1.0, IT-M25 x 1.0, IT-M27 x 1.0, OT-M25 x 0.5,OT-M25 x 0.75, OT-M27 x 1
Others also bought
![BMW Wheel Lock Removal Kit](/assets/thumb/ET6064.jpg?20200709031855)
BMW Wheel Lock Removal Kit
This kit is designed to remove high security BMW wheel lock bolts with spinning rings, where the bolt cannot be removed because the key is missing, or the bolt is rounded etc.
A faster solution than grinding / drilling, which is also more likely to result in damage to the wheel.
This kit allows the wheel lock bolt to be removed in a few minutes. A real timing saving tool!
- Slide hammer: M16 x 1.5
More from this category
![17T Hydraulic Injector Extractor Kit](/assets/thumb/ET3049.jpg?20200709032628)
17T Hydraulic Injector Extractor Kit
A specialised kit that assists with the extraction of very tight fitting injector nozzles, utilising a special pull spindle. Contains a 17T hydraulic ram, with 15mm stroke. Height retracted 89mm | extended 104mm.
This kit is designed to be used with a bridge, and injector pullers. These are available separately.
- M14 x 1.5 pitch Pulling Spindle 240mm long.
- M14 x 1.5 pitch Pulling Spindle 315mm long.
- M17 x 1.0 pitch Pulling Spindle 240mm long.
- M17 x 1.0 pitch Pulling Spindle 315mm long.
- M18 x 1.5 pitch Pulling Spindle 315mm long.
- M25 x 1.0 pitch Pulling Spindle 240mm long.
![BMW Diesel Injector Removal Kit](/assets/thumb/ET1748A.jpg?20200709032712)
BMW Diesel Injector Removal Kit
A specialised kit for removing BMW diesel injectors in vehicles with M47 | M57 engines, without having to remove the cylinder head.
The special extraction bridge and pull spindle allows for quick / safe injector removal.
To avoid the risk of impurities entering the combustion chamber during the cleaning process, we strongly suggest the use of a compressed air adaptor.
- Engine codes: M47TU | M57 | M57TU
- Spindle 16 (one side M17) for mounting in the injector
- 29mm socket for disassembling the electric unit
- Internal 6 Pt wrench for removing the injector needle
![BMW N55 Injector Removal Tool](/assets/thumb/ET1526B.jpg?20240409111652)
BMW N55 Injector Removal Tool
A specialised tool for late model BMW N55 petrol engines to safely / quickly install / remove the fuel injectors. For earlier N55 engines (before July 2013) please refer to ET1593A.
- Application: BMW 3.0L (2008 - 2016)
- Engine: N55 (from July 2013 onwards) - up to engine # 14407684
- OEM equiv: 130270 (13 0 270)
![Bosch / Lucas Diesel Injector Puller](/assets/thumb/ET2193A.jpg?20200709031206)
Bosch / Lucas Diesel Injector Puller
Kit consists of a slide hammer with adaptors to assist the removal of stubborn Bosch and Lucas diesel injectors.
- Adaptors: M8 P0.75 (male) | M12 P1.5 (Bosch) | M14 x P 1.5 (Volvo / Scania)
- Slide hammer thread: M12 | 175mm length (without adaptors).
![Bosch Injector Removal Kit](/assets/thumb/ET4059.jpg?20200709031659)
Bosch Injector Removal Kit
Specialised kit for demounting stuck injectors (mainly Bosch) without removing the cylinder head. Wide coverage on 1.3L - 2.2L diesel engines.
![Chrysler Injector Puller | 2.5L | 2.7L](/assets/thumb/ET1437.jpg?20200709033028)
Chrysler Injector Puller | 2.5L | 2.7L
This specialised injector puller is designed to safely extract tightly stuck injectors on Chrysler 2.5L | 2.7L CRD 16 valve VM engines.