A very handy kit, with a wide range of interchangeable pins, for holding the camshaft gear when loosening / tightening the centre bolt.
The adjustable jaw opening / interchangeable pin sets allows this tool to be used almost universally, although with the addition of the T10554 counterhold tool, this kit is specifically designed for VAG vehicles.
- Adaptor sizes: ¯4.8mm, ¯6mm, square 15mm x 6mm, square 15mm x 12mm, cup 13mm x 17mm, cup 16mm x 20mm, Spline M10, M12
- OEM Equiv: T10172 | T10554
Engine Code(s)
DFCA, CZCA, CHZB, DKJA, DKRF, CVNA, CMBA, CZDA, CHZC, CHPA, CYVB, CYVC, CHZJ, CHZL, CHYB, CJZD, CJZC, DAVA, CXEB, CXEC, DFGA, DAWA
| Vehicle Make | Model | Series | Engine Code | Engine Size | Year Start | Year End |
| Skoda | Octavia | NE | CHPA | 1.4L | 2013 | 2015 |
| Volkswagen | Golf | MK7 | CHPA | 1.4L | 2012 | 2015 |
| Volkswagen | Up! | AA | CHYB | 1.0L | 2012 | 2014 |
| Skoda | Citigo | AA | CHYB | 1.0L | 2013 | 2014 |
| Audi | A1 | 8X | CHZB | 1.0L | 2015 | 2019 |
| Skoda | Fabio | NJ | CHZB | 1.0L | 2017 | |
| Skoda | Rapid | NH | CHZB | 1..0L | 2018 | |
| Skoda | Fabia | NJ | CHZC | 1.0L | 2017 | 2021 |
| Volkswagen | Polo | AW | CHZJ | 1.0L | 2017 | 2021 |
| Volkswagen | Polo | AW | CHZL | 1.0L | 2017 | 2021 |
| Skoda | Fabia | NJ | CJZC | 1.2L | 2015 | 2017 |
| Volkswagen | Polo | MK5 | CJZC | 1.2L | 2014 | 2018 |
| Skoda | Rapid | NH | CJZC | 1.2L | 2015 | 2019 |
| Skoda | Fabia | Typ NJ | CJZD | 1.2L | 2015 | |
| Skoda | Rapid | Typ NH | CJZD | 1.2L | 2015 | |
| Volkswagen | Polo | MK5 Typ 6R | CJZD | 1.2L | 2014 | |
| Audi | A3 | 8V | CMBA | 1.4L | 2013 | 2014 |
| Volkswagen | Golf | MK7 | CMBA | 1.4L | 2012 | 2015 |
| Audi | A4 | B9 | CVNA | 1.4L | 2015 | 2020 |
| Volkswagen | Multivan | T6 | CXEB | 2.0L | 2015 | 2020 |
| Volkswagen | Transporter | T6 | CXEB | 2.0L | 2017 | 2019 |
| Volkswagen | California | 7H | CXEC | 2.0L | 2020 | |
| Volkswagen | Multivan | T6 | CXEC | 2.0L | 2020 | |
| Volkswagen | Transporter | T6.1 | CXEC | 2.0L | 2020 | |
| Skoda | Yeti | Typ 5L | CYVB | 1.2L | 2015 | 2017 |
| Volkswagen | Caddy | 2K | CYVC | 1.2L | 2016 | 2021 |
| Audi | A1 | 8X | CZCA | 1.4L | 2015 | |
| Audi | A3 | 8V | CZCA | 1.4L | 2014 | |
| Skoda | Rapid | NH | CZCA | 1.4L | 2015 | |
| Skoda | Yeti | 5L | CZCA | 1.4L | 2015 | |
| Volkswagen | Golf | MK7 | CZCA | 1.4L | 2015 | |
| Skoda | Octavia | Typ NE | CZDA | 1.4L | 2015 | |
| Skoda | Yeti | Typ 5L | CZDA | 1.4L | 2016 | |
| Volkswagen | Golf | MK7 Typ AU | CZDA | 1.4L | 2015 | |
| Volkswagen | Crafter | SY | DAVA | 2.0L | 2017 | |
| Volkswagen | Crafter | SY | DAWA | 2.0L | 2018 | |
| Volkswagen | Passat | B8 | DFCA | 2.0L | 2015 | 2018 |
| Skoda | Superb | NP | DFCA | 2.0L | 2015 | 2018 |
| Audi | Q2 | GA | DFGA | 2.0L | 2017 | 2018 |
| Skoda | Kodiaq | NS | DFGA | 2.0L | 2017 | |
| Volkswagen | Tiguan | AD1 | DFGA | 2.0L | 2016 | 2018 |
| Audi | A1 | GB | DKJA | 1.0L | 2019 | |
| SEAT | Arona | KJ | DKJA | 1.0L | 2018 | |
| SEAT | Ibiza | KJ | DKJA | 1.0L | 2017 | |
| Volkswagen | Polo | AW | DKJA | 1.0L | 2017 | 2021 |
| Volkswagen | T-Cross | C1 | DKJA | 1.0L | 2020 | |
| Audi | A1 | GB | DKRF | 1.0L | 2019 | |
| Skoda | Kamiq | NW | DKRF | 1.0L | 2020 | 2021 |
| Skoda | Scala | NW | DKRF | 1.0L | 2019 |
T10172
T10554
| SKU | ET1872A |
| Barcode # | 9321280411715 |
| Brand | Automotive |
| Product weight | 2.9000kg |
| Shipping weight | 2.900000kg |
| Vehicle Make | VAG |
| Vehicle Make | Mercedes |
| Vehicle Make | BMW |
| Vehicle Make | Ford |
| Vehicle Make | Mitsubishi |
| Vehicle Make | Honda |
| Vehicle Make | Nissan |
| Vehicle Make | Toyota |
| Vehicle Make | Volvo |
12 Months
Others also bought
Isuzu Crankshaft Front Oil Seal Installer
A specialised tool for quickly / safely installing the front crankshaft oil seal on 3.5 tonne Isuzu vehicles.
- Application: Isuzu 3.5 Tonne
- Engine codes: 4JJ1 | LFB
- OEM seal: BZ4962E
Isuzu Crankshaft Rear Oil Seal Remover
A specialised oil seal removal tool for Isuzu 4J series engines.
The tool reaches around the rear wear sleeve, and locates on the back edge of the sleeve, in order to pull the sleeve from the camshaft. Once positioned, bolt the puller to the puller disc, to secure the legs for easy removal of the sleeve.
- Engine codes: 4JB1 | 4JJ1 (RT50) | 4JB1 | 4JG1 | 4JG2 | 4JH1 | RF10 (4JK1)
- Application: Isuzu ELF 3.5 Tons
- OEM equiv: 5-8840-2360-0
More from this category
Adjustable Camshaft Pulley Holding Tool
A versatile tool for holding the camshaft gear when loosening / tightening the centre bolt. The adjustable jaw and replaceable pin sets makes this kit universal in application.
- This kit has been updated with two extra pin sets. These 5mm / 8mm pins are essential to suit late model VAG engines.
Adjustable Crankshaft Pulley Holding Tool
Interchangeable grooved pins hold crankshaft pulley stationary when loosening / tightening the centre bolt. Includes 3 interchangeable pairs of pins - 15mm diameter. Pin lengths: 70mm, 74mm, 110mm.
- Applications include Mercedes (M112 | M113 | M271 | M642) and Nissan (A32 | A33)
- Adjustable range: 30 - 150mm PCD
- Overall length: 15-1/4" (388mm)
Adjustable V Belt Pulley Holding Wrench
This holding wrench has an extendable handle (up to 65mm) to provide extra leverage in confined areas. Ideal for when an OEM tool is not available.
Belt Automatic Tensioner Locking Pin Set
A set of pins for locking back automatic tension devices during timing belt replacement.
- Sizes: 0.79mm, 1.24mm, 1.37mm, 1.49mm, 1.68mm, 1.92mm
Bosch VE Injector Pump Timing Kit
Accurate setting of Bosch diesel fuel pump timing. 3-in-1 kit with M8 | M10 | M12 adaptors and extension pins.
- Short timing adaptor
- Extension adaptor
- M12 thread adaptor
- Thumb screw
- Extension pin - short
- Extension pin - long
- M10 thread adaptor
Cam Locking / Setting Set
A comprehensive set of popular camshaft | crankshaft locking tools for twin cams / flywheels.