An essential diagnostic tool for testing potentially faulty relays. This tool tests both 12V / 24V relays, with four / five pins (not late model Ford 4 pin).

• Quickly test 4 types of electro mechanical relays
• Test relay coil resistance / relay contacts / cyclic testing
• Relay coil resistance 20 - 500 Ohms

This tool is used to check for proper pin-fit and tension on US, European and Asian automotive electrical female terminals. This tool covers Japanese and Korean built vehicles including, Toyota, Honda, Mitsubishi, Mazda, Nissan, Subaru, Suzuki, Isuzu, Kia and Hyundai vehicles. This tool also covers US joint venture vehicles including Ford / Mazda, GM / Toyota, Ford / Nissan, and GM / Suzuki.

The tool is precision manufactured in the US. The tool has looped wires that are colour coded and the colour code chart is located on the packaging. The tool meets all RoHS requirements for all of the components and the finished product.

A must-have tool to properly diagnose electrical and electronic concerns on all common makes and models.

• Colour coded
• Made in USA
• Check socket fit condition

A two bladed model for RG-58 | 59 | 62 | 6 | 3C | 4C | 5C cable. Suits cables with a diameter from 4.9mm2 to 7.5mm2.

This tool is efficiently designed to make wire stripping quick and easy. The tool can strip and cut wire from 1.13mm (squared) - 6.0mm (squared). It can also be used to crimp insulated / non-insulated terminals.

Widely used by Caterpillar, Harley, Kenworth etc. This kit contains 6 dies for common Deutsch terminals.

• K1: AWG 14/12 (DT / P)
• K2: AWG 10/12 (DT / P)
• K3: AWG 18/16/14 (DT / M)
• K4: AWG 20/18/16 (DT / M)
• K5: AWG 20/18 (DT / M)
• K6: AWG 16/14/12 (DT / P)

Versatile kit with dies for crimping battery cables, balustrading wire, and swaging.

8T hydraulic crimping force for ease of use.

• Die Sizes: 6, 10, 16, 25, 35, 50 & 70mm² Swaging Die
• Overall length: 320mm

A pack of two optional dies for the ET5114 hydraulic crimper tool. These dies are commonly used for Deutsch crimps.

• #4 crimping die
• #8 crimping die

• Spark Plug connector (HJ12-H1)
• Weatherpack terminals (HJ12-H5)
• Non-Insulated terminals (HJ12-B)
• Open Barrel terminals (0.5-6mm 2 ) (HJ12-C)
• Open Barrel terminals (0.1-1.0mm 2 ) (HJ12-C1)
• Open Barrel terminals & D-SUB, V3.5
(0.5?10mm 2 ) (HJ12-H)