Manual type pressure tank to refill ATF on automatic transmissions without a dipstick. Includes 21 adapters for most common vehicles.

Tank with 6 litre / 1.5 gallon capacity, suitable for most transmissions - Audi, Ford, Holden, Mercedes, Nissan, Toyota, VW, and Volvo et c.

Specially designed tank base for feet to step on to stabilise the tank while pumping.

• Includes 21 adaptors

This test performs leak down tests which can be more accurate than normal compression tests.

Leak down tests can be used to detect various engine faults including leakage past rings, head gaskets, intake / exhaust valves etc.

• Requires air source of 70-160PSI, as the unit will pressurise system to 60PSI.
• Spark plus thread hoses: 10, 12, 14mm | regulator & o-rings

This kit contains a special cap, and gauge in order to test oil pressure on a range of BMW engines.

• Engines: N20 | N46 | N55
• OEM equiv: 119250

Easy to read 2-1/2" diameter gauge features colour coded quadruple calibrations. 6" heavy duty stem with universal rubber cone adaptor fits all plug holes. Convenient pressure holding side release valve. Provides an accurate reading on high performance engines.

• 0-300 PSI | 21kg/cm | 21 Bar | 2100kPA
• 13" durable rubber hose with 14mm | 18mm adaptors.

This cylinder leakage kit can diagnose a range of engine faults including blown head gaskets, cylinder head cracks, and worn piston rings / valves.

The twin gauge manifolds shows percentage of cylinder leakage, and cylinder pressure. Suitable for use on petrol engines with 10 | 12 | 14mm spark plugs.

For deeply recessed spark plugs, a long reach compression test adaptor may be required.

• Suitable for use with 10mm / 12mm / 14mm spark plugs.
• Readings: cylinder leakage / cylinder pressure (psi / bar)

Comprehensive set with adaptors to suit most common Asian / European / US vehicles. These connectors are not interchangeable with the ET7191 compression test kit.

• Normal operating range: 750PSI
• Gauge: 0-1,000 PSI

Tests return flow pressure from Bosch | Delphi | Siemens common rail injectors. Suitable for testing Piezo pass / fail statement.

• Gauges: 1-3 Bar & 1-15 Bar.
• Transparent body to check for air pockets / diesel fuel condition.