A specialised kit for removing BMW diesel injectors in vehicles with M47 | M57 engines, without having to remove the cylinder head.
The special extraction bridge and pull spindle allows for quick / safe injector removal.
To avoid the risk of impurities entering the combustion chamber during the cleaning process, we strongly suggest the use of a compressed air adaptor.
- Engine codes: M47TU | M57 | M57TU
- Spindle 16 (one side M17) for mounting in the injector
- 29mm socket for disassembling the electric unit
- Internal 6 Pt wrench for removing the injector needle
Engine Code(s)
M47TUD20, M47D20, M57TUD30, M57D30
| Vehicle Make | Model | Series | Engine Code | Engine Size | Year Start | Year End |
| BMW | 320D | E46 | M47D20 | 2.0L | 1999 | 2005 |
| BMW | 320D | E91 | M47D20 | 2.0L | 2004 | 2007 |
| BMW | 320D | E90 | M47D20 | 2.0L | 2004 | 2007 |
| BMW | 520D | E60 | M47D20 | 2.0L | 2005 | 2007 |
| Land Rover | Freelander | M47D20 | 2.0L | 2000 | 2007 | |
| BMW | 118D | E87 | M47TUD20 | 2.0L | 2004 | 2007 |
| BMW | 120D | E87 | M47TUD20 | 2.0L | 2006 | 2007 |
| BMW | X3 | E83 | M47TUD20 | 2.0L | 2003 | 2006 |
| BMW | 325D | E90 | M57D30 | 3.0L | 2008 | 2010 |
| BMW | 330D | E46 | M57D30 | 3.0L | 1999 | 2001 |
| BMW | 330D | E46 | M57D30 | 3.0L | 2002 | 2005 |
| BMW | 330D | E90 | M57D30 | 3.0L | 2004 | 2008 |
| BMW | 330D | E91 | M57D30 | 3.0L | 2005 | 2008 |
| BMW | 335D | E90 | M57D30 | 3.0L | 2005 | 2010 |
| BMW | 525D | E61 | M57D30 | 3.0L | 2005 | 2010 |
| BMW | 525D | E60 | M57D30 | 3.0L | 2006 | 2009 |
| BMW | 530D | E39 | M57D30 | 3.0L | 1998 | 2003 |
| BMW | 530D | E60 | M57D30 | 3.0L | 2008 | 2010 |
| BMW | 535D | E60 | M57D30 | 3.0L | 2004 | 2009 |
| BMW | 535D | E61 | M57D30 | 3.0L | 2004 | 2010 |
| BMW | 730D | E65 | M57D30 | 3.0L | 2004 | 2008 |
| BMW | X5 | E53 | M57D30 | 3.0L | 2000 | 2003 |
| BMW | 530D | E60 | M57TUD30 | 3.0L | 2002 | 2008 |
| BMW | 730LD | E66 | M57TUD30 | 3.0L | 2005 | 2008 |
| BMW | X3 | E83 | M57TUD30 | 3.0L | 2005 | 2011 |
| BMW | X5 | E70 | M57TUD30 | 3.0L | 2004 | 2010 |
| BMW | X6 | E71 | M57TUD30 | 3.0L | 2008 | 2010 |
| SKU | ET1748A |
| Barcode # | 9321280389083 |
| Brand | Automotive |
| Product weight | 7.4000kg |
| Shipping weight | 7.400000kg |
| Vehicle Make | BMW |
12 Months
More from this category
17T Hydraulic Injector Extractor Kit
A specialised kit that assists with the extraction of very tight fitting injector nozzles, utilising a special pull spindle. Contains a 17T hydraulic ram, with 15mm stroke. Height retracted 89mm | extended 104mm.
This kit is designed to be used with a bridge, and injector pullers. These are available separately.
- M14 x 1.5 pitch Pulling Spindle 240mm long.
- M14 x 1.5 pitch Pulling Spindle 315mm long.
- M17 x 1.0 pitch Pulling Spindle 240mm long.
- M17 x 1.0 pitch Pulling Spindle 315mm long.
- M18 x 1.5 pitch Pulling Spindle 315mm long.
- M25 x 1.0 pitch Pulling Spindle 240mm long.
BMW N55 Injector Removal Tool
A specialised tool for late model BMW N55 petrol engines to safely / quickly install / remove the fuel injectors. For earlier N55 engines (before July 2013) please refer to ET1539A.
- Application: BMW 3.0L (2008 - 2016)
- Engine: N55 (from July 2013 onwards) - up to engine # 14407684
- OEM equiv: 130270 (13 0 270)
Bosch / Lucas Diesel Injector Puller
Kit consists of a slide hammer with adaptors to assist the removal of stubborn Bosch and Lucas diesel injectors.
- Adaptors: M8 P0.75 (male) | M12 P1.5 (Bosch) | M14 x P 1.5 (Volvo / Scania)
- Slide hammer thread: M12 | 175mm length (without adaptors).
Bosch Injector Removal Kit
Specialised kit for demounting stuck injectors (mainly Bosch) without removing the cylinder head. Wide coverage on 1.3L - 2.2L diesel engines.
Chrysler Injector Puller | 2.5L | 2.7L
This specialised injector puller is designed to safely extract tightly stuck injectors on Chrysler 2.5L | 2.7L CRD 16 valve VM engines.
Diesel Injection Line Wrench Kit | 3 Pce
A specialised kit of diesel injection line wrenches. These open end 12 point crowsfoot sockets are designed for servicing the union nut on high pressure lines on common rail injection engines.
- 14mm | 17mm | 19mm
- 12 point
- 1/2" Sq Drv