A specialised socket for removing oxygen sensors. This socket is offset, only 31mm high / 57mm long making it ideal to use in those harder to reach areas.
- 22mm diameter
- 31mm high
- 3/8" Sq Drv
| SKU | ET1629-1 |
| Barcode # | 9321280371309 |
| Brand | Automotive |
12 Months
More from this category
NOX Sensor Tap Set (2 Pce)
These short series taps are designed to restore exhaust sensor port threads before installing new NOx sensors.
- Applications include: Ford EcoBlue | Mercedes
- M20 x 1.5 | M22 x 1.5 threads
- 48mm overall length
- Made from Titanium coated Chrome Moly
- Use with axle grease to catch any removed metal in the threads.
O2 / Vacuum Switch Socket
Cut out in socket allows the wires to the sensors to be bypassed. Wire range of applications including Holden, Mitsubishi, Nissan and VAG vehicles.
- 7/8" (22mm) dia | 7mm slot
- 80mm OL
- 3/8" Sq Drv
Oxygen Sensor Port Thread Chaser
This thread chaser is designed to clean and repair damaged oxygen sensor port threads.
This thread chaser can also be used on 12mm spark plugs. Always use ANTI-SEIZE.
- M12 x 1.25 thread
Oxygen Sensor Port Thread Chaser
This thread chaser is designed to clean and repair damaged oxygen sensor port threads.
This thread chaser can also be used on 18mm spark plugs. Always use ANTI-SEIZE.
- M18 x 1.50 thread
- Use with 21mm socket
Oxygen Sensor Socket | 22mm
Specialised socket with slot that allows the sensor wires to be bypassed. Applications include Holden, Mitsubishi, Nissan and VAG group vehicles.
For heated and non heated Lambda sensors.
- 22mm dia
- 90mm overall length
- 3/8" Sq Drv
Oxygen Sensor Socket | Thin Wall
A specialised Lambda socket for shrouded sensors on Ford Fiesta 1.2L (08 - 16). Thin wall design / cut out slot allow access to the sensor which is otherwise difficult to access due to the tight fitting heat shield.
- Thin wall
- 22mm x 119mm
- 1/2" Sq Drv