This kit is designed for testing truck cooling systems. The kit includes four tapered adaptors that suit larger radiators found on trucks, construction equipment etc. A gauge / pump is also included.

• Suitable for American | European | Japanese style adaptors
• Tapered adaptors: 17-35mm | 26.5-41mm | 37-50mm | 47-60mm
• Gauge / pump: 0-35 PSI (0-2.5 Bar)

A precision instrument to accurately measure the strength of battery fluid, screenwash, antifreeze (including synthetics) and aqueous / urea AdBlue^¨ content. A very versatile unit, especially with the ability to measure AdBlue concentration.

• Temperature corrected prism for improved accuracy
• Adjustable focus eyepiece
• Simple calibration using distilled water
• Supplied with pipette & storage case

• 5mm orbit | 6" diameter
• Central vacuum
• 1.6 CFM
• RPM: 12,000

Effective diagnostic tool for determining whether faults are due to the turbo system, or simple air leaks.

• Includes 3 pairs of stepped adaptors to fit most sizes found on commercial vehicles.
• Includes pressure gauge, shut off valve, and pressure release valve.
• Adaptor sizes: 105 - 130mm

Our new updated radiator pressure test kit sets the new industry benchmark!

Faster, easier, and more comfortable to use, than existing kits.

Perform cooling system leak tests, vacuum type coolant refills, and leak tests on radiator caps.

• Updated adaptors (more coverage than older kits) - includes new Volvo Hybrids
• Updated pressure pump, coolant refill and adaptor design
• Faster refill speed - 91 ml / sec vs 37 ml
• Connectors are compatible with superceded adaptor kits

A specialised set of 4 pin lock nut sockets for driving lug lock nuts with external teeth. The kit contains sockets from 20mm - 72mm diameter.

Please refer to the kit components for details of individual sockets.

• 1/2" Sq Drv
• 60mm overall length

Adjustable jaws fit all hexagon (49 - 135mm) & octagon (49 - 143mm) wheel bearing lock nuts. Contains three sets of pins, applicable to any pin holes on the nut.

• 6 Point lock nuts: 1-3/4" - 5-3/4" (49 - 135mm)
• 8 Point lock nuts: 1-3/4" - 5-5/8" (49 - 143mm)
• Pin diameters: 1/4" | 5/16" | 3/8"

A specialised kit for removing the cylinder liner on Caterpillar, Cummins, Mercedes OM460 and Volvo D13 engines.

This tool works on wet liners ONLY, with a 3-7/8" to 6-1/4" bore, up to 15" deep, with a minimum wall thickness of 0.148.

• Applications: Cummins | Mack | Detroit | International | Volvo and other Cat Engines 3176, 3196, 3300 Series, 3400 Series, 3500 Series, C10, C12, C15, C16, Maxxforce DT, DT360, DTA360, DTA466, DT466, DT466E, DT530 (PLN), DT530E, DT570, HT570.
• Spring loaded arms adjust to fit the liner automatically.
• For cylinder liners up to 15" deep.

A specialised front / rear crankshaft seal wear sleeve installer kit. Designed for quick / safe servicing of oil seals.

• Applications: C15 / C16: 3406 | 3406B | 3406C | 3406E | 3408
• OEM equiv: 5P-1733 | 5P-1737 (3) | 6V-6142 | 6V-6143 | 9S-8858
• Oil seals: 142-5867 | 142-5868 | 2W1734 | 319-0785 | 336012