Effective diagnostic tool for determining whether faults are due to the turbo system, or simple air leaks.

• Includes 3 pairs of stepped adaptors to fit most sizes found on commercial vehicles.
• Includes pressure gauge, shut off valve, and pressure release valve.
• Adaptor sizes: 105 - 130mm

An extra heavy duty puller for disassembling even the most seized U joints in minutes on virtually all heavy duty commercial vehicles.

This puller is engineered to be used with 1" Sq Drv impact tools. Reduces the risk of damage to driveshafts, yokes, joints and bearing cups.

To use, simply remove all bolts from the bearing cup. Slide the puller over the drive line yoke. Turn forcing screw clockwise with impact wrench.

• Application: U-Joints with bearing cups 1-1/2" - 2.2" OD.
• Ensure forcing screw is always lubricated.

A specialised set of 4 pin lock nut sockets for driving lug lock nuts with external teeth. The kit contains sockets from 20mm - 72mm diameter.

Please refer to the kit components for details of individual sockets.

• 1/2" Sq Drv
• 60mm overall length

Adjustable jaws fit all hexagon (49 - 135mm) & octagon (49 - 143mm) wheel bearing lock nuts. Contains three sets of pins, applicable to any pin holes on the nut.

• 6 Point lock nuts: 1-3/4" - 5-3/4" (49 - 135mm)
• 8 Point lock nuts: 1-3/4" - 5-5/8" (49 - 143mm)
• Pin diameters: 1/4" | 5/16" | 3/8"

A specialised rear wheel socket for BPW trailers. This socket has an oval internal profile.

• Applications: BPW 13 - 14T trailer (from 11/04)
• 120mm OVAL profile
• 1" Sq Drv

A specialised ball joint remover for European trucks. Designed for on vehicle maintenance, and to avoid damage to ball joints and related parts.

Easy to use / save time & money.

• 39mm dia opening
• Nut width 26mm / Bolt length 128mm
• Applications: > 4 Tonne trucks, including most European trucks
• Special application for MAN 414 drag links.

A specially designed tool to install / remove the wheel speed sensor. A time saving tool allowing for on vehicle servicing.

To extract, put the tool on the hub, then turn the screw until the speed sensor is removed. For reinstalling the speed sensor, place the speed sensor in position, then install the tool (until it is in the correct place).

• Application: Hino 11T trucks