A specialised kit for injector removal on Sprinter, C Class / E Class. Extractor key for inner part of Bosch injectors included.
This kit allows for the removal of injectors without the need to use a slide hammer, and without removing the cam cover / damaging the cylinder head.
- 29mm diesel injector window socket
- 10mm hex extractor key
- Support shaft bearing assembly
Use the 29mm window socket to remove the nozzle head from the injector. Then use the 10mm key to remove the insert from the injector.
Place the support shaft bearing assembly over the injector. Make sure that the wide shoulders of the shaft support the tool. With a 10mm spanner, screw the shaft down onto the injector. Then using a 24mm spanner, in an anti-clockwise motion, draw the injector out of the cylinder head.
| SKU | ET1302 |
| Barcode # | 9321280338890 |
| Brand | Automotive |
| Product weight | 1.0700kg |
| Shipping weight | 1.070000kg |
| Vehicle Make | Mercedes |
12 Months
More from this category
17T Hydraulic Injector Extractor Kit
A specialised kit that assists with the extraction of very tight fitting injector nozzles, utilising a special pull spindle. Contains a 17T hydraulic ram, with 15mm stroke. Height retracted 89mm | extended 104mm.
This kit is designed to be used with a bridge, and injector pullers. These are available separately.
- M14 x 1.5 pitch Pulling Spindle 240mm long.
- M14 x 1.5 pitch Pulling Spindle 315mm long.
- M17 x 1.0 pitch Pulling Spindle 240mm long.
- M17 x 1.0 pitch Pulling Spindle 315mm long.
- M18 x 1.5 pitch Pulling Spindle 315mm long.
- M25 x 1.0 pitch Pulling Spindle 240mm long.
BMW Diesel Injector Removal Kit
A specialised kit for removing BMW diesel injectors in vehicles with M47 | M57 engines, without having to remove the cylinder head.
The special extraction bridge and pull spindle allows for quick / safe injector removal.
To avoid the risk of impurities entering the combustion chamber during the cleaning process, we strongly suggest the use of a compressed air adaptor.
- Engine codes: M47TU | M57 | M57TU
- Spindle 16 (one side M17) for mounting in the injector
- 29mm socket for disassembling the electric unit
- Internal 6 Pt wrench for removing the injector needle
BMW N55 Injector Removal Tool
A specialised tool for late model BMW N55 petrol engines to safely / quickly install / remove the fuel injectors. For earlier N55 engines (before July 2013) please refer to ET1593A.
- Application: BMW 3.0L (2008 - 2016)
- Engine: N55 (from July 2013 onwards) - up to engine # 14407684
- OEM equiv: 130270 (13 0 270)
Bosch / Lucas Diesel Injector Puller
Kit consists of a slide hammer with adaptors to assist the removal of stubborn Bosch and Lucas diesel injectors.
- Adaptors: M8 P0.75 (male) | M12 P1.5 (Bosch) | M14 x P 1.5 (Volvo / Scania)
- Slide hammer thread: M12 | 175mm length (without adaptors).
Bosch Injector Removal Kit
Specialised kit for demounting stuck injectors (mainly Bosch) without removing the cylinder head. Wide coverage on 1.3L - 2.2L diesel engines.
Chrysler Injector Puller | 2.5L | 2.7L
This specialised injector puller is designed to safely extract tightly stuck injectors on Chrysler 2.5L | 2.7L CRD 16 valve VM engines.