This female ribe socket is used for adjusting the M12S bolt on the idler belt on Nissan vehicles, and head bolts on E16S engines (from 1987). This socket is also suitable for any other applications requiring a 16mm ribe socket.
- M12S Ribe impact socket (to suit 16mm ribe bolts)
- 38mm length
- 1/2" Sq Drv
Ribe (Female) Impact Socket Set (4 Pce)
Specialised female ribe sockets in 1/2" Sq Drv for clutches, cylinder heads and balance shaft fixings. Commonly used on Nissan / Renault vehicles, and Toyota idler pulley belts.
Impact grade for use with air tools.
- M6 | M8 | M10 | M12 Female ribe sockets
- 1/2" Sq Drv
- Chrome Moly construction
European / Japanese Special Socket Set (13 Pce)
A specialised automotive socket set containing hard to find female Ribe, female Pentagon, and security Spliine sockets.
These sockets are used on a wide range of vehicles, especially Nissan / Renault and VAG group vehicles.
Packaged on a handy socket rail.
- Female Pentagon sockets: 10 | 12 | 14 | 19mm
- Pentagon male bit socket: 10mm
- Spline (security): M16S (60mm) | M18S (75mm)
- 10pt profile: 20mm
- Female Ribe sockets: M6S | M8S | M10S | M12S (M8S also drives Torx Plus T55)
| SKU | ET1223B |
| Barcode # | 9321280377912 |
| Brand | Endeavour |
| Product weight | 0.0100kg |
| Shipping weight | 0.090000kg |
| Drive | 1/2" Sq Drv |
| Socket Type | Standard |
| Style | Impact |
| Type | Ribe |
| Vehicle Make | Nissan |
| Size | M12 |
| Length | 38mm |
| Material | Chrome Moly |
12 Months
Others also bought
Thin Wall Spark Plug Socket
Specialised spark plug socket for vehicles fitted with current model Bosch spark plugs. These sockets are thin walled with a magnet to hold the spark plug. Regular 14mm sockets will not fit in the limited access area.
These spark plugs are fitted on most Citroen vehicles along with BMW (N12 | N14 | N45 | N51 | N52 | N53 | N54) | BMW Mini (R55 (08 Mini Cooper & Cooper S Clubman) | R56 (07 Mini Cooper & Cooper S Hatchback) | R57 (Mini Cooper & Cooper S Convertible), Mercedes M156, Peugeot 207 | 307 and Renault 1.2L 16V
- 14mm dia | 92mm length
- 12 Point (Double Hex)
- 3/8" Sq Drv
- Magnetic holder
- Thin wall
Injector Seal Removal / Installation Tool
Injector blowback is a common problem with diesel engines. To remedy this, either a new copper washer needs to be fitted and / or the injector seat needs to be gently refaced before installing a new copper washer.
This tool is designed to easily remove / install copper washers in deep seated injectors.
To remove / install a copper washer, the protrusion of the split collet should be set according to the thickness of the seal to be removed / installed.
- 7mm ID | 230mm reach
- For deep seated injector seals
More from this category
Female Ribe Socket | M10S
This M10S female ribe socket has a wide variety of automotive applications, including removing the retaining screw on Toyota idler pulley belt, in order to be able to adjust the idler belt.
On Toyota (most) 1ZZFE / (all) 2ZZGE engines, this socket fits the bolt that secures the pulley to the belt tensioner. If your pulley has an exposed bolt this is the right tool. If your 1ZZ pulley has a black plastic cap covering the bolt head then it is more likely to be a standard Torx bolt.
- Applications: Toyota 1.8L 1ZZFE (98-08) / 2ZZGE / 2AZ-FE / 2AR-FE / 1AR-FE / 2GR-FE
- M10 female ribe socket
- 1/2" Sq Drv
Female Ribe Socket | M6
This socket is suitable for various engine repairs on Nissan vehicles. Also suits Volvo S40 variable pulley.
- M6 female Ribe
- 1/2" Sq Drv
- 38mm overall length
Female Ribe Socket | M8
This socket is suitable for various engine repairs on Nissan vehicles.
- M8 female Ribe
- 1/2" Sq Drv
- 38mm OL
Ribe (Female) Impact Socket Set (4 Pce)
Specialised female ribe sockets in 1/2" Sq Drv for clutches, cylinder heads and balance shaft fixings. Commonly used on Nissan / Renault vehicles, and Toyota idler pulley belts.
Impact grade for use with air tools.
- M6 | M8 | M10 | M12 Female ribe sockets
- 1/2" Sq Drv
- Chrome Moly construction
Ribe Bit Socket | M7 | 200mm
A specialised Ribe bit socket for headlight alignment on Alfa / Fiat vehicles. Also suitable for other applications requiring an M7 Ribe bit.
- M7 Ribe bit socket
- 200mm overall length
- 3/8" Sq Drv
Ribe Impact Socket | M11
Specialised Ribe impact socket for removing flywheel fixing bolts on Nissan / Renault M9R 2.0L DCi engines.
- M11 Ribe
- 78mm overall length
- 1/2" Sq Drv
- Chrome Moly