JLR 3.0L | 5.0L Crankshaft Holding Kit

SKU: ET1019

Automotive


This kit comprises a specialised tool to hold the crankshaft pulley while installing / removing the crankshaft bolt on late model (2010 onwards) 3.0L | 5.0L engines, plus a deep socket for the crankshaft front pulley bolt.

  • Engine codes: AJ126 | 306PS | 508PN | 508PS

SKU Description OEM Equivalent Codes
ET1017L

JLR Crankshaft Pulley Holding Tool

303-1437

ET1018L

JLR Crankshaft Pulley Socket

303-1438

Engine Code(s)

306PS, 508PS, 508PN, AJ126

Vehicle Make Model Series Engine Code Engine Size Year Start Year End
JaguarF Type306PS3.0L2013
JaguarF-Pace306PS3.0L2016
JaguarXEX760306PS3.0L2017
JaguarXFX250306PS3.0L2012
JaguarXJX351306PS3.0L2013
Land RoverDiscoverySeries 5306PS3.0L2017
Land RoverDiscoverySeries 4306PS3.0L20142015
Land RoverRange RoverLG306PS3.0L2013
Range RoverSportLW306PS3.0L2013
Range RoverVelar306PS3.0L2006
Land RoverDiscovery 4Series 4508PN5.0L20092015
Range RoverSport508PN5.0L20092013
JaguarXFX250508PN5.0L20092012
JaguarXJX351508PN5.0L20102013
JaguarXKX150508PN5.0L20102015
Range RoverSportLW508PS5.0L2013
Land RoverRange RoverLG508PS5.0L2013
JaguarXKR-SX150508PS5.0L20122015
JaguarXKRX150508PS5.0L20102015
JaguarXJX351508PS5.0L2010
JaguarXFR-SX250508PS5.0L2013
JaguarXF RX250508PS5.0L20092015
JaguarXFX250508PS5.0L2015
JaguarF Type508PS5.0L20132017
JaguarF Pace508PS5.0L2019
JaguarXEX760AJ1263.0L20152017
JaguarXFX260AJ1263.0L2016
SKU ET1019
Barcode # 9321280399464
Brand Automotive
Product weight 5.1800kg
Shipping weight 5.180000kg
Vehicle Make Jaguar

12 Months

Calculate Shipping



Flat Rate Shipping - $16.50
$16.50 flat rate shipping
Manual handling charge for long packaged products - $35.00
Manual handling charge for long packaged products


More from this category


Crankshaft Front Oil Seal Tool | Ford Ranger Crankshaft Front Oil Seal Tool | Ford Ranger

Crankshaft Front Oil Seal Tool | Ford Ranger

Required tools when replacing the crank seal / removing front engine cover to replace the chain. For use on 2.0L | 2.2L | 2.4L | 3.2L TDCi / TDDi Duratorq engines fitted to Ford Transit | Ford Ranger plus Jaguar X Type X400 and Land Rover Defender.

  • First component removes diesel pump sprocket cover, and also allows oil seal to be removed / replaced.
  • Second component aligns / centralises the front camshaft chain cover before fitting the new oil seal.

Ford / JLR Oil Pump Alignment Tool

Ford / JLR Oil Pump Alignment Tool

Oil pump locking tool for 2.0L, 2.2L, 2.4L, 3.2L diesel engines and 2.3L Duratec petrol engines.

Allows the oil pump to be removed / replaced in the same position (to ensure that the oil pump is not operating with excessive side loads).

  • Mondeo | Ranger | Transit (2.0 / 2.2 / 2.4 / 3.2 TDCi / TDDi / Di Duratorq)
  • OEM Equiv: 303-705 | 303-1093 (PSA 0198H)

Ford 2.2L Diesel Balance Shaft Locking Kit

Ford 2.2L Diesel Balance Shaft Locking Kit

A specialised kit for holding / locking balance shafts fitted to the 2.2L DOHC diesel engines in JLR / Citroen vehicles.

  • Applications: Land Rover Discovery Sport | Freelander 2, Mitsubishi Outlander, Citroen C5, Ford Mondeo
  • Engines: 244DT | 4HK / 4HL / 4HN / 4HP / 4HR / 4HS / 4HT / 4HW / 4HX / 4HZ | KNBA | KNBB | KNWA | Q4BA, DW12BTED4 / DW12CTED4 / DW12MTED4

JLR 2.5 TDS Injection Pump Puller

JLR 2.5 TDS Injection Pump Puller

Retains the pump sprocket in position when diesel pump is removed, as the pump sprocket & timing chain remains undisturbed reducing engine disassembly time. Use for 2.5L TDS transverse mounted engines in BMW (E34 | E36 | E38) 1.7L & 2.5L / Holden / Land Rover TD5. Always lubricate forcing screw.

  • OEM Equiv: 13 5 120 (135120) | KM-825

JLR 2.7L | 3.0L Crankshaft Trigger Wheel Tool

JLR 2.7L | 3.0L Crankshaft Trigger Wheel Tool

An essential tool for installing the crankshaft position sensor ring on JLR vehicles fitted with the TDV6 engine, and also the trigger wheel to the rear crankshaft of Jaguar engines (300 powertrain).

  • Applications: Land Rover Discovery 3 & 4 | Range Rover Sport, Jaguar X200 S Type | X250 XF | X350 XJ | X351 XJ, Ford Territory
  • Engines: 2.7L | 3.0L TDV6 diesel
  • OEM Equiv: 303-1130
JLR 3.0L TDV6 Diesel Fuel Pump Holding Tool JLR 3.0L TDV6 Diesel Fuel Pump Holding Tool

JLR 3.0L TDV6 Diesel Fuel Pump Holding Tool

Specialised tool for locking the high pressure fuel pump in its timed position when replacing the high pressure pump drive belt.

  • Applications: 3.0L DOHC V6 diesel engine including XF, XJ, Discovery, Range Rover Sport and Ford Ranger.
  • Engine code: 306DT
  • OEM Equiv: 310-212 | T50130