Test battery charge / health for all 12V auto batteries and alternator / crank systems for 12V / 24V batteries, including new stop start batteries.

Print test results using the built in printer.

• Tests all main battery standards
• Max load voltage tests for 12V / 24V
• Short circuit / reverse polarity protection

A specialised oil filler funnel designed to connect directly to the oil filler neck on a wide range of Subaru vehicles.

Part of the Endeavour Tools range of specialised oil filler funnels.

• Transparent chamber shows oil flow.
• Large oil passage allows fast oil flow.
• Durable NBR seal.
• Adaptor thread: M42 x P4.5.

Convert your Android scan tool into a professional battery tester! Or use with your mobile phone / tablet. Easily send test reports by email.

• Works with all common automotive batteries including AGM / GEL / Lithium.
• Professional tester showing battery status, charging / cranking tests, and voltage monitoring for deep analysis.

High resolution 5.5 mm dia camera. Wifi connectivity.

• 3.5" TFT LCD
• 320 x 240px display resolution
• 1280 x 720px sensor resolution
• Rechargeable battery
• Mirror / hook / magnet attachments X 1m cable length
• Front & side camera

Provides real time thermal imaging / surface temperature measurement. This unit features a digital camera to pinpoint the test area, over which the thermal image is overlaid.

Ideal for automotive, construction, electrical. For example, overheating wiring, hot / cold spots in brakes, wheel bearings, cooling systems, exhaust, fuse box, seats etc.

Updated version ! Wifi connectivity, rechargeable battery.

• 256 x 192px infrared resolution
• -20 deg C to 550 deg C temperature measurement range
• 3.5" colour screen
• 6.6GB internal storage
• Rechargeable 26650mAh battery

Test battery charge / health for all 12V auto batteries and alternator / crank systems for 12V / 24V batteries, including new stop start batteries.

Print test results using the built in printer.

• Tests all main battery standards
• Max load voltage tests for 12V / 24V
• Short circuit / reverse polarity protection

This pressure brake bleeder is designed to be portable, being powered by the vehicle's 12V battery. No shop air required!

Features adjustable output pressure up to a maximum 3.0 bar, with automatic cut-off function when pressure falls below 0.5 bar. This high pressure bleeder is compatible with electro-hydraulic braking systems that operate at a higher pressure than conventional systems.

Supplied with premium quality adaptor set made from metal, not plastic.

• Suitable for both hydraulic brake and clutch systems.
• Adjustable pressure from 0 - 3 Bar.
• Powered by the vehicle's 12V battery
• Compatible with DOT 3 | DOT 4 | DOT 5.1 brake fluids

This petrol engine timing light is designed for professional use. Featuring multiple measurement modes and a rotating barrel for better aim at the timing market and LCD viewing angle.

• Tachometer: 249 to 9,990 RPM (± 1% Accuracy)
• Dwell: 0¡ to 180¡ / 2 - 12 cylinders (±1% Accuracy)
• Voltage: 10 - 16V DC (± 1% Accuracy)
• Advance Degrees (2 / 4 cycle DIS & Conventional): 0¡ to 90¡ ( ± 0.5¡ Accuracy)

A pack of high quality Roloc style CDR discs. These discs are designed for use with Roloc style sanders. These discs are made from high quality felt.

• 2" diameter
• Felt material
• 10 pack

This test performs leak down tests which can be more accurate than normal compression tests.

Leak down tests can be used to detect various engine faults including leakage past rings, head gaskets, intake / exhaust valves etc.

• Requires air source of 70-160PSI, as the unit will pressurise system to 60PSI.
• Spark plus thread hoses: 10, 12, 14mm | regulator & o-rings

This true RMS clamp meter provides accurate AC, AC/DC Current and Voltage readings regardless of waveforms. This meter can be used in most industrial and commercial applications where non-linear loads distort the Current or Voltage waveform.

• 30mm clamp opening
• 1000A current AC / DC
• 600V voltage AC / DC
• 4000 Digital display counts
• CAT III 600V rating