This advanced system tester is designed to test all 12V auto batteries (lead, AGM, EFB, GEL etc) including stop / start batteries. The unit tests battery condition PLUS charging (alternator) and starter (crank) systems.

The battery test analyses battery health status to calculate actual cold cranking capability of the battery. The tester will advise whether the battery needs replacing, and is also able to identify a faulty battery before actual failure.

The cranking test analyses the starting circuit (including the starter motor) by measuring increases in starting torque load. The charging test analyses the charging system, detecting under or overcharging.

• Testing range: 100 - 2,000CCA
• Powered from vehicle's 12V battery | no internal battery required

A specialised tool for removing the sensor module connector on 0B5 transmissions (7 speed DCT with wet clutch). To use, simply connect the socket to the housing, turn anti-clockwise, then remove the connector housing.

• Applications: 0B5 transmissions
• Vehicles: Audi A4 (08-) | A5 Cabriolet (09-) | Q5 (08-) | A5 Coupe (08-) | A5 Sportback (08-) | A7 Sportback (11-)
• OEM Equiv: T40228

A specialised tool to remove / install the dual clutch on GS7D36SG (DKG) transmissions.

• OEM Equiv: 23 0 400

For GA6HP19Z / GA6 HP19Z / GA6L45R gearboxes.

• E90, E91, E92, E93, E70, F20, F21, F22, F23 models, with N51, N52, N55, M57 engines
• OEM Equiv: 241370 | 83300495486

A specialised kit for centering clutch discs on flywheels when installing self adjusting clutches (SAC). Designed to align the clutch disc before installing a self adjusting clutch.

Also suitable for aligning new / already pretensioned SAC clutches.

Also refer ET1733A

• Applications: S5D-200G | S5D-250G | S5D-260Z | S5D-310Z | S6S-420G | S6S-560G | GS6-37BZ | GS6-37DZ | GS6-53BZ | GS6-53DZ
• Sizes: 15mm dia x 23mm | 15mm dia x 26.5mm | 15mm dia x 28mm | 15mm dia x 32.5mm | 15mm dia x 34mm
• Centering sleeve: 15mm | 32.5mm

A specialised mandrel for centering clutch discs on flywheels when installing self adjusting clutches (SAC). Designed to align the clutch disc before installing a self adjusting clutch.

Also suitable for aligning new / already pretensioned SAC clutches.

• 15mm diameter x 26.5mm x 60mm (overall length)
• Suits transmissions: GS6-37BZ | GS6-37DZ

A specialised mandrel for centering clutch discs on flywheels when installing self adjusting clutches (SAC). Designed to align the clutch disc before installing a self adjusting clutch.

Also suitable for aligning new / already pretensioned SAC clutches.

• 15mm diameter x 26.5mm x 80mm (overall length)
• Applications: 320i (E90 / N46), 325i (E90 / N52)
• Suits transmissions: GS6-17BG | GS6-17DG | S5D-250G