This automatic gearbox oil filler set is suitable for Mercedes 9G-Tronic 725.0xx series gearboxes. These gearboxes can contain two different sump variations; this kit suits both.

The kit contains a socket wrench to adjust oil levels, and a quick release coupling.

• Applications: E350 Bluetec (13-) | CLS models (14-)
• OEM Equiv: 725589009000 | 725589029000

The Air Boy thrust gun is ideal for cleaning tasks where high airflow is needed. The thrust nozzle increases the airflow by 100% because of the venturi principle - and is at the same time unblockable.

This gun is supplied with two nozzles - a standard nozzle, and a 90 degree nozzle (for blowing out filters etc). Both nozzles simply screw on, and are replaceable.

The pipe is fitted with insulation that protects the hands against cold air.

• 1/4" BSP inlet
• 1,000mm long pipe
• Air flow: 600 litres / min @ 8 Bar
• Working pressure: max 12 Bar
• Noise level: 98.2Db @ 8 Bar

Test battery charge / health for all 12V auto batteries and alternator / crank systems for 12V / 24V batteries, including new stop start batteries.

Print test results using the built in printer.

• Tests all main battery standards
• Max load voltage tests for 12V / 24V
• Short circuit / reverse polarity protection

A new safety blow gun from Air Boy featuring high airflow | Low noise level | Unblockable tip | Integrated chip shield.

• 600l / min @ 8 bar
• 78 db @ 6 bar
• OSHA STD 1-13.1 compliant
• Industry leading airflow for a low noise blow gun

European made quality!

Two variants - one for light solvents / other for general use.

• Trigger with filter
• Matt top cover
• ML & OZ scale
• Stable base

European made quality!

Two variants - one for light solvents / other for general use.

• Trigger with filter
• Matt top cover
• ML & OZ scale
• Stable base

A specialised adaptor kit to remove / install front and rear wheel bearings with spindles, on the vehicle. Designed to reduce the chance of damage to the hub and bearing, while saving time. Sleeves fit most standard wheel bearing sizes.

• Suitable for use with impact wrench
• Applications: Mercedes, BMW, VW, Audi, Porsche, Volvo, Toyota, Lexus, Nissan, Infiniti, Honda, Acura

A specialised kit for replacing O-ring seals on the bottom of petrol injectors in a range of BMW engines.

This kit includes a small slide hammer which screws onto the top of the injector.

• Applications: N13 | N14 | N18 | N20 | N43 | N54 | N55 | N63 | N73 | S55 | S63 | B38 | B48
• Guide cones: 7.45mm / 7.8mm
• Seating sleeves: 8.9mm (7.8mm) | 9.3mm (8.0mm) | 9.5mm (8.1mm)
• Seating tool: 9.2mm (9.05mm)
• OEM Equiv: 130280 | 130281 | 130282 | 130283 | 130190 | 130192 | 130193 | 130194