This automatic gearbox oil filler set is suitable for Mercedes 9G-Tronic 725.0xx series gearboxes. These gearboxes can contain two different sump variations; this kit suits both.
The kit contains a socket wrench to adjust oil levels, and a quick release coupling.
- Applications: E350 Bluetec (13-) | CLS models (14-)
- OEM Equiv: 725589009000 | 725589029000
725 589 02 90 00
725 589 00 90 00
Mercedes ATF Filler | Stick Type Drainer
This stick type drainer is use to turn the overflow pipe to drain old ATF fluid.
Mercedes ATF Filler | Refill Adaptor
This refill adaptor is design to refill new ATF fluid by connecting to the drain plug hole.
Mercedes ATF Filler | Cup Type Drainer
This cup type drainer is designed to hold small volumes of old ATF when the drain plug is released
725 589 02 90 00
725 589 00 90 00
Mercedes ATF Filler | Stick Type Drainer
This stick type drainer is use to turn the overflow pipe to drain old ATF fluid.
Mercedes ATF Filler | Refill Adaptor
This refill adaptor is design to refill new ATF fluid by connecting to the drain plug hole.
Mercedes ATF Filler | Cup Type Drainer
This cup type drainer is designed to hold small volumes of old ATF when the drain plug is released
SKU | ET0048M |
Barcode # | 9321280395800 |
Brand | Automotive |
Product weight | 0.1000kg |
Shipping weight | 0.350000kg |
Vehicle Make | Mercedes |
12 Months
Calculate Shipping
Flat Rate Shipping - $16.50
$16.50 flat rate shipping
Manual handling charge for long packaged products - $35.00
Manual handling charge for long packaged products
More from this category
12V / 24V Battery Tester w/ Printer
Test battery charge / health for all 12V auto batteries and alternator / crank systems for 12V / 24V batteries, including new stop start batteries.
Print test results using the built in printer.
- Tests all main battery standards
- Max load voltage tests for 12V / 24V
- Short circuit / reverse polarity protection
12V Lead Acid / Lithium Battery Analyser
A professional quality automotive battery tester for testing both 12V lithium ion and lead acid batteries. This tester uses conductance technology; a passive testing methodology which does not discharge / drain the battery. This analyser also checks the alternator's charging and starter's cranking condition.
- Tests all 12V lithium ion / lead acid batteries for cars / motor cycles.
- Print function via PC printer
- Testing range: Lithium ion 20- 1000CCA | Lead acid 20 - 2000CCA
12V Timing Light | Petrol
This petrol engine timing light is designed for professional use. Featuring multiple measurement modes and a rotating barrel for better aim at the timing market and LCD viewing angle.
- Tachometer: 249 to 9,990 RPM (± 1% Accuracy)
- Dwell: 0¡ to 180¡ / 2 - 12 cylinders (±1% Accuracy)
- Voltage: 10 - 16V DC (± 1% Accuracy)
- Advance Degrees (2 / 4 cycle DIS & Conventional): 0¡ to 90¡ ( ± 0.5¡ Accuracy)
ET2512-ADAP Promo
12V Towing Socket Tester (13 Pin)
A professional quality tester designed for late model vehicles fitted with 13 pin Euro type sockets fitted to the back of the vehicle.
This tester is designed for testing the vehicle side socket, not the trailer itself.
- Tests socket functionality on modern 13 pin Euro sockets. Can also test legacy 7 pin sockets (separate adaptor).
- CANbus compatible to also test 12V continuous / ignition live feeds and the reversing lights. Useful when diagnosing faults.
- Built in self test function on the tool.
- Supplied with 4m cable to allow the unit to be used while sitting in the vehicle.
- Powered by vehicle 12V power supply.
AC / DC 1000A True RMS Clamp Meter
This true RMS clamp meter provides accurate AC, AC/DC Current and Voltage readings regardless of waveforms. This meter can be used in most industrial and commercial applications where non-linear loads distort the Current or Voltage waveform.
- 30mm clamp opening
- 1000A current AC / DC
- 600V voltage AC / DC
- 4000 Digital display counts
- CAT III 600V rating
Advanced 12V Battery System Tester
This advanced system tester is designed to test all 12V auto batteries (lead, AGM, EFB, GEL etc) including stop / start batteries. The unit tests battery condition PLUS charging (alternator) and starter (crank) systems.
The battery test analyses battery health status to calculate actual cold cranking capability of the battery. The tester will advise whether the battery needs replacing, and is also able to identify a faulty battery before actual failure.
The cranking test analyses the starting circuit (including the starter motor) by measuring increases in starting torque load. The charging test analyses the charging system, detecting under or overcharging.
- Testing range: 100 - 2,000CCA
- Powered from vehicle's 12V battery | no internal battery required