O2 / Vacuum Switch Socket

22mm
SKU: DA4124

Automotive


Cut out in socket allows the wires to the sensors to be bypassed. Wire range of applications including Holden, Mitsubishi, Nissan and VAG vehicles.

  • 7/8" (22mm) dia | 7mm slot
  • 80mm OL
  • 3/8" Sq Drv

SKU DA4124
Barcode # 9321280262355
Brand Automotive
Product weight 0.2430kg
Shipping weight 0.243000kg
Vehicle Make VAG
Vehicle Make Holden
Vehicle Make Nissan
Vehicle Make Mitsubishi

12 Months


More from this category


NOX Sensor Tap Set (2 Pce)

NOX Sensor Tap Set (2 Pce)

These short series taps are designed to restore exhaust sensor port threads before installing new NOx sensors.

  • Applications include: Ford EcoBlue | Mercedes
  • M20 x 1.5 | M22 x 1.5 threads
  • 48mm overall length
  • Made from Titanium coated Chrome Moly
  • Use with axle grease to catch any removed metal in the threads.

Oxygen Sensor Port Thread Chaser

Oxygen Sensor Port Thread Chaser

This thread chaser is designed to clean and repair damaged oxygen sensor port threads.

This thread chaser can also be used on 12mm spark plugs. Always use ANTI-SEIZE.

  • M12 x 1.25 thread

Oxygen Sensor Port Thread Chaser

Oxygen Sensor Port Thread Chaser

This thread chaser is designed to clean and repair damaged oxygen sensor port threads.

This thread chaser can also be used on 18mm spark plugs. Always use ANTI-SEIZE.

  • M18 x 1.50 thread
  • Use with 21mm socket

Oxygen Sensor Socket | 22mm

Oxygen Sensor Socket | 22mm

Specialised socket with slot that allows the sensor wires to be bypassed. Applications include Holden, Mitsubishi, Nissan and VAG group vehicles.

For heated and non heated Lambda sensors.

  • 22mm dia
  • 90mm overall length
  • 3/8" Sq Drv

Oxygen Sensor Socket | Offset | 22mm

Oxygen Sensor Socket | Offset | 22mm

A specialised socket for removing oxygen sensors. This socket is offset, only 31mm high / 57mm long making it ideal to use in those harder to reach areas.

  • 22mm diameter
  • 31mm high
  • 3/8" Sq Drv

Oxygen Sensor Socket | Thin Wall

Oxygen Sensor Socket | Thin Wall

A specialised Lambda socket for shrouded sensors on Ford Fiesta 1.2L (08 - 16). Thin wall design / cut out slot allow access to the sensor which is otherwise difficult to access due to the tight fitting heat shield.

  • Thin wall
  • 22mm x 119mm
  • 1/2" Sq Drv