Air Boy 1.5 L EPDM PP Seal Kit - compatible with SKU 124EP15

The legendary driveway tyre inflator made in the UK for Australian conditions.

Repair kit available 124MK3-RK.

• 0 - 138 PSI

The legendary driveway tyre inflator made in the UK for Australian conditions - is now also available in a digital model. This digital model is suitable for inflating truck tyres.

Repair kit available 124MK3-RK

• Extremely robust aluminium body with protective rubber bumper - Long accurate life expectancy
• Small 'stubby' body is the lightest metal bodied digital inflator on the market - Easy to use with reduced fatigue
• Slimline biomorphic body shape gives increased comfort for the user - Fast to use and handle
• Higher pressure range for multiple applications 4 - 250 psi range (including trucks) - Versatile and flexible saving time and money
• Permanently backlit in use, auto off after 25 seconds no-use - Easy to read in dark workshops or at night - Increased flexibility saving cost and time
• Large screen and clear digits - Easy and quick to read - Increasing accuracy and speed of use
• IP54 - can be used indoors and outdoors, saving time and increasing service
• Individually tested and certified against national approved gauges - Guaranteed accuracy
• Long battery life - 400 hours of use - Replaceable 2 X AAA batteries power unit (supplied)
• 3 units of calibration toggle as standard - psi, bar & kPa
• 2 second button hold for calibration toggle
• Registered Design

Test battery charge / health for all 12V auto batteries and alternator / crank systems for 12V / 24V batteries, including new stop start batteries.

Print test results using the built in printer.

• Tests all main battery standards
• Max load voltage tests for 12V / 24V
• Short circuit / reverse polarity protection

This pressure brake bleeder is designed to be portable, being powered by the vehicle's 12V battery. No shop air required!

Features adjustable output pressure up to a maximum 3.0 bar, with automatic cut-off function when pressure falls below 0.5 bar. This high pressure bleeder is compatible with electro-hydraulic braking systems that operate at a higher pressure than conventional systems.

Supplied with premium quality adaptor set made from metal, not plastic.

• Suitable for both hydraulic brake and clutch systems.
• Adjustable pressure from 0 - 3 Bar.
• Powered by the vehicle's 12V battery
• Compatible with DOT 3 | DOT 4 | DOT 5.1 brake fluids

This petrol engine timing light is designed for professional use. Featuring multiple measurement modes and a rotating barrel for better aim at the timing market and LCD viewing angle.

• Tachometer: 249 to 9,990 RPM (± 1% Accuracy)
• Dwell: 0¡ to 180¡ / 2 - 12 cylinders (±1% Accuracy)
• Voltage: 10 - 16V DC (± 1% Accuracy)
• Advance Degrees (2 / 4 cycle DIS & Conventional): 0¡ to 90¡ ( ± 0.5¡ Accuracy)

A pack of high quality Roloc style CDR discs. These discs are designed for use with Roloc style sanders. These discs are made from high quality felt.

• 2" diameter
• Felt material
• 10 pack

This test performs leak down tests which can be more accurate than normal compression tests.

Leak down tests can be used to detect various engine faults including leakage past rings, head gaskets, intake / exhaust valves etc.

• Requires air source of 70-160PSI, as the unit will pressurise system to 60PSI.
• Spark plus thread hoses: 10, 12, 14mm | regulator & o-rings

This true RMS clamp meter provides accurate AC, AC/DC Current and Voltage readings regardless of waveforms. This meter can be used in most industrial and commercial applications where non-linear loads distort the Current or Voltage waveform.

• 30mm clamp opening
• 1000A current AC / DC
• 600V voltage AC / DC
• 4000 Digital display counts
• CAT III 600V rating