This petrol engine timing light is designed for professional use. Featuring multiple measurement modes and a rotating barrel for better aim at the timing market and LCD viewing angle.

• Tachometer: 249 to 9,990 RPM (± 1% Accuracy)
• Dwell: 0¡ to 180¡ / 2 - 12 cylinders (±1% Accuracy)
• Voltage: 10 - 16V DC (± 1% Accuracy)
• Advance Degrees (2 / 4 cycle DIS & Conventional): 0¡ to 90¡ ( ± 0.5¡ Accuracy)

A combination air / hand powered pump for quickly extracting brake fluid, coolant, engine oil, transmission fluid etc. Do not use to extract petrol.

An optional hose to bleed brakes (with brake nipple connector) - ET3586-BRAK is also available.

• Massive 10L capacity avoids the need to remove drain plugs etc
• Supplied with 4 suction tubes (6mm oil | 7mm oil | brake fluid connector | 10mm gear oil)

A professional quality kit for removing aftermarket wheel lock nuts. This kit includes a wide range of sockets / bits for removing locking wheel nuts.

• See download link for detailed socket listing
• Made from Chrome Vanadium steel for added durability

THE "NO-LEAK" TYRE CHUCK

A new patented non-sealing tyre chuck. Guaranteed 100% leak free, and able to self lock onto the valve.

Ideal for retrofitting Haltec style automatic tyre inflators.

Straightforward to use! Push connector onto valve to connect. Pull sleeve to disconnect.

Just like an air coupler!

Thin wall wheel nut socket with special 17mm profile for Mercedes vehicles. Impact grade with nylon sleeve to protect against scratching alloy wheels.

Applications include Mercedes C Class (W204) and E Class (W211 | W212 | W207)

NEW DESIGN! The patented ring at the top of the sockets helps prevent breakage. As such, these sockets last up to 4 times longer than traditional thin wall wheel nut sockets. A plastic sleeve helps protects surfaces.

• 1/2" Sq Drv
• Size: 17mm (special profile)
• Impact grade
• Thin wall (with protective sleeve)

An incredibly handy set of wheel nut sockets. These sockets are new half size sockets for chrome covered nuts which have become swollen / warped.

Inflated / warped chrome plated caps are a common problem, especially on some Ford vehicles. Standard sized wheel nut sockets will not fit, and a half sized variant is required.

The 19.5mm socket is designed for VW Amarok vehicles.

• Thin wall impact sockets (with protective sleeve)
• 18.5mm | 19.5mm diameter
• 6 point sockets
• 1/2" Sq Drv

The legendary driveway tyre inflator made in the UK for Australian conditions.

Repair kit available 124MK3-RK.

• 0 - 138 PSI

The legendary driveway tyre inflator made in the UK for Australian conditions - is now also available in a digital model. This digital model is suitable for inflating truck tyres.

Repair kit available 124MK3-RK

• Extremely robust aluminium body with protective rubber bumper - Long accurate life expectancy
• Small 'stubby' body is the lightest metal bodied digital inflator on the market - Easy to use with reduced fatigue
• Slimline biomorphic body shape gives increased comfort for the user - Fast to use and handle
• Higher pressure range for multiple applications 4 - 250 psi range (including trucks) - Versatile and flexible saving time and money
• Permanently backlit in use, auto off after 25 seconds no-use - Easy to read in dark workshops or at night - Increased flexibility saving cost and time
• Large screen and clear digits - Easy and quick to read - Increasing accuracy and speed of use
• IP54 - can be used indoors and outdoors, saving time and increasing service
• Individually tested and certified against national approved gauges - Guaranteed accuracy
• Long battery life - 400 hours of use - Replaceable 2 X AAA batteries power unit (supplied)
• 3 units of calibration toggle as standard - psi, bar & kPa
• 2 second button hold for calibration toggle
• Registered Design

Air Boy quality with premium German WIKA gauge / twin connector.

• Highly accurate ( /- 0.19 Bar)
• Handle operation eased by compressed air
• Air escape / deflation valve
• 50cm hose
• 0 - 174 PSI | 0 - 12 Bar

The Sonsbeek bar style tyre inflator has an aluminium reader bar, making it ideal for inflating / deflating / measuring water filled tyres. These are commonly used on tractors / agricultural vehicles.

This inflator is designed for rugged use, and has a pressed steel lever, as well as a rubber grip on the dual angle hold on chuck.

• 10 - 120 PSI measurement range
• 1/4" BSP female connector
• Dual angle hold on chuck

• 0 - 160 PSI measurement range
• 1/4" NPT female inlet
• 427mm hose length